Engaging 4x4 Without locking hubs
- ricster
- Patrolman 1000+
- Posts: 5853
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 473 times
Re: Engaging 4x4 Without locking hubs
Difflock only on gravel though, and only needs to be on for a few seconds as you just need to ensure the solenoids are switching over.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Peter Connan
- Moderator
- Posts: 6137
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1125 times
- Been thanked: 1036 times
Re: Engaging 4x4 Without locking hubs
Jules, you can engage 4x4 without locking the hubs, but there would be no advantage, as the wheels will not recieve any power.
Mag ons ons kenniskry met lekkerkry aanhoukry.
- davidvdm
- Patrolman
- Posts: 629
- Joined: 13 Sep 2011 15:47
- Full Name: David vd Merwe
- Nickname: David - Hillbilly
- Home Town: West Coast
- Current 4x4: 1997 2.7TD Nissan Sani Mk3 4x4 SFA (SAFANI)
- Home Language: English/Afrikaans
- Has thanked: 4 times
- Been thanked: 48 times
- Contact:
Re: Engaging 4x4 Without locking hubs
I don't drive a Patrol, but the principle is the same. I have manual only Hubs... Here in our small town, I just leave them locked so that the diff gets some exercise in the 1.7Km commute to work. When I hit the highway, they are usually unlocked to try and drop the additional drag that the diff and drive-train to the transfer box may cause.
I have often engaged (stationary) 4L with the hubs unlocked to negotiate a trailer with good power and low speeds without riding the clutch.
I have always wondered on a open diff, like my bakkie has, what are the drive shafts doing with absolutely no resistance from the wheels if you are in 4WD with the hubs unlocked. My fear is that you get the same affect as if you were standing on a very slippery surface and you get one wheel spinning and the other standing still. How good can this be for the diff?
I have often engaged (stationary) 4L with the hubs unlocked to negotiate a trailer with good power and low speeds without riding the clutch.
I have always wondered on a open diff, like my bakkie has, what are the drive shafts doing with absolutely no resistance from the wheels if you are in 4WD with the hubs unlocked. My fear is that you get the same affect as if you were standing on a very slippery surface and you get one wheel spinning and the other standing still. How good can this be for the diff?
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
- Peter Connan
- Moderator
- Posts: 6137
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1125 times
- Been thanked: 1036 times
Re: Engaging 4x4 Without locking hubs
David, I doubt whteher this is happening as you would need a considerable difference in friction to cause that.
Even if it is happening, there is almost no load, so I doubt it would cause much damage? Unless of course there is another problem in thea xle causing it?
Even if it is happening, there is almost no load, so I doubt it would cause much damage? Unless of course there is another problem in thea xle causing it?
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Senior Member
- Posts: 314
- Joined: 27 Feb 2010 23:39
- Full Name: Roy Markham
- Nickname: Roy
- Home Town: Kempton Park
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 2 times
- Been thanked: 2 times
Re: Engaging 4x4 Without locking hubs
I like the ability to use LR on tar / bricks for steep driveways etc, with the auto locking patrols there's no "off" is there?
- Peter Connan
- Moderator
- Posts: 6137
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1125 times
- Been thanked: 1036 times
Re: Engaging 4x4 Without locking hubs
No, but all you're going to do is to wear the tires out a bit faster.
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Alex Roux
- Patrolman 1000+
- Posts: 2668
- Joined: 11 Jul 2011 10:54
- Full Name: Alexander Roux
- Nickname: Calculator
- Home Town: Johannesburg
- Current 4x4: 2004 GU 3TDi (Lexus) - aka "Witblits" (sold)
2005: GU TD42 - aka "Masewa"
1996: GQ TB48 conversion - aka "Skilpad"
1993: GQ SWB TB42 - aka "Shortie"
1985: MQ Patrol (Safari) SD33 - aka "Toro" - Home Language: Afrikaans
- Has thanked: 60 times
- Been thanked: 255 times
Re: Engaging 4x4 Without locking hubs
Peter
Speaking of wear and tear, but a little off topic:
Do you know why the Patrol (unlike thte LC) does not have a central differential gear?
Not having a central differential gear means that if the front and rear diffs are locked, then ALL is locked on the Patrol, rather than havign to lock the central diff as well.
However, I also thought that not havgin a central diff may mean that there may also be more wear when driving 4x4 on tar?
Speaking of wear and tear, but a little off topic:
Do you know why the Patrol (unlike thte LC) does not have a central differential gear?
Not having a central differential gear means that if the front and rear diffs are locked, then ALL is locked on the Patrol, rather than havign to lock the central diff as well.
However, I also thought that not havgin a central diff may mean that there may also be more wear when driving 4x4 on tar?
Skilpad, Shortie, Toro & Masewa
- Tinus lotz
- Moderator
- Posts: 7590
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 802 times
- Been thanked: 562 times
Re: Engaging 4x4 Without locking hubs
Alex Piet is going to see this only tommorow afternoon but this is how I understand it piet will correct me were I am wrong.......
The patrol is a 4x4 with a gearbox that has a transfer case 2h 4h and 4l the moment you put it in 4h the transfer locks the box to put 50% to the back and 50% to the front the patrol is only to be used in 4x4 were it is needed or you wear the tires more like normal ttar road ect .there are stil slip between the two wheels on eatch axle if the diff is not locked
On a permanent 4x4 you have a centre diff that doesn't work the same as a transfer case you need to lock the center diff to get 50 to front and 50 to the back. You need to lock the front and back diff to get the permanent 4x4 to work the way we want it to
So with the center diff not locked it allows the nessasary slip needed not to wear tires ect more or less the same as a normal front or rear diff on any car .....
Hope I haven't got it all wrong but this is the way I understood the difference between the two
The patrol is a 4x4 with a gearbox that has a transfer case 2h 4h and 4l the moment you put it in 4h the transfer locks the box to put 50% to the back and 50% to the front the patrol is only to be used in 4x4 were it is needed or you wear the tires more like normal ttar road ect .there are stil slip between the two wheels on eatch axle if the diff is not locked
On a permanent 4x4 you have a centre diff that doesn't work the same as a transfer case you need to lock the center diff to get 50 to front and 50 to the back. You need to lock the front and back diff to get the permanent 4x4 to work the way we want it to
So with the center diff not locked it allows the nessasary slip needed not to wear tires ect more or less the same as a normal front or rear diff on any car .....
Hope I haven't got it all wrong but this is the way I understood the difference between the two

-
- Senior Member
- Posts: 314
- Joined: 27 Feb 2010 23:39
- Full Name: Roy Markham
- Nickname: Roy
- Home Town: Kempton Park
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 2 times
- Been thanked: 2 times
Re: Engaging 4x4 Without locking hubs
I think you spot on Tinus, also the reason way I can't stand permanent 4x4's. You know what a mission is was to get the disco behaving properly with two new tyres? Traction control would go mad and I couldn't get over 80 on a slight bend on the highway. Give a 4x2 anyday.
Being able to use Low Range on the steep durban driveways is a blessing some guys take for granted.
Being able to use Low Range on the steep durban driveways is a blessing some guys take for granted.
- Peter Connan
- Moderator
- Posts: 6137
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1125 times
- Been thanked: 1036 times
Re: Engaging 4x4 Without locking hubs
Alex, there are Cruisers and Cruisers. Some (the bakkies, Troopies, a few Prados and LC76) are exactly the same as the Patrol, while the fancy ones (most Prados, 80, 100/105 and 200) are permanent 4x4. These must have a center diff lock simply to make them equal to our cars off-road.
Yes, a part-time 4x4 will have a bit more wear and tear when used on hard surfaces in 4x4, but conversely they will have less wear and tear on hard surfaces in normal road mode (although it doesn't make much difference).
The idea that it will break if you select 4x4 on tar is nonsense, because then it would not be able to tackle steep rocky slopes like Gert se klip/Koos se klip etc. because those are also high-traction surfaces, where you require much more torque than on tar.
Yes, a part-time 4x4 will have a bit more wear and tear when used on hard surfaces in 4x4, but conversely they will have less wear and tear on hard surfaces in normal road mode (although it doesn't make much difference).
The idea that it will break if you select 4x4 on tar is nonsense, because then it would not be able to tackle steep rocky slopes like Gert se klip/Koos se klip etc. because those are also high-traction surfaces, where you require much more torque than on tar.

Mag ons ons kenniskry met lekkerkry aanhoukry.
Who is online
Users browsing this forum: No registered users and 2 guests