Page 1 of 1
Front bumper removal
Posted: 13 May 2014 08:51
by Andrewfus
Any tips or techniques???
Anything that I should watch out for?
Its a 4.8 2013.... I see a gazillion bolts that are holding the bumper...
Re: Front bumper removal
Posted: 13 May 2014 10:05
by AndriesS
most bolts keep the plastic to inner strengthener of the bumper.
undo the plastic triangular covers just in front of the front wheels that screws to the side of the bumper to the inner fender. you should be able to disconnect the fog lights now. I can't recall if I undid the bumper from the top (i.e. removed the grill or from the bottom. Undo th4 bolts ( I think 2 each side that holds the strengthener on the chassis rails. I think that was it, don;t need to undo al those 10mm bolts .
Re: Front bumper removal
Posted: 13 May 2014 10:15
by Andrewfus
Thanks.
So you say I can remove the whole bumper by loosening the 4 main bolts....
I will look again this afternoon.
