Page 1 of 1

Replacing V Belts

Posted: 27 Mar 2011 17:19
by stefnie
Hi Guys, does anybody know how to replace these belts?

I have tried and succeeded halfway in replacing the 2 fanbelts and one belt for the oilpump but the belt for the aircon pump baffles me.

Detailed instructions for a "mechanically handicapped" person please!

Thanks.
Christo Muller.

Re: Replacing V Belts

Posted: 28 Mar 2011 07:32
by AndriesS
Hi,

I'm not familiar with the 4.5's layout but on the 4.8l we have a an idler pulley that is accessible from the bottom. You need to undo the bolt in the center of the of pulley, not remove it, just undo it a turn or two, then you need to remove the tension by undoing the tension bolt enough so the belt will slip off.

Re: Replacing V Belts

Posted: 28 Mar 2011 07:59
by AndriesS
looks like access to the older engine's ac pulley are from the top

Re: Replacing V Belts

Posted: 28 Mar 2011 12:47
by Peter Connan
Hi Stefnie

It is like Andries's picture shows. Loosen the centre nut on the Idler pulley (it is a long nut and if I remember correctly it takes a 12 or 14mm spanner. Then slack off the adjusting screw on the pulley, it is reached from the top. You will need a socket with a long (200mm) extension to do that.

Cheers

Re: Replacing V Belts

Posted: 28 Mar 2011 19:16
by Herrie
Dis reg hoe jy die 4.5 ook doen.

Re: Replacing V Belts

Posted: 28 Mar 2011 20:38
by stefnie
Thank you guys, all went well thanks to your sketch John and to my wife's tiny hands! I cursed these Japanese who makes it very frustrating to work within such confined spaces!