Page 25 of 32
Re: Bash Plates
Posted: 10 Oct 2014 13:52
by Peter Connan
Gentlemen, I do not do a diff guard for the rear diff, for the following reasons:
1) The front of the diff doesn't need one.
2) The diff-lock solenoid is too close to the panhard rod, there is no room for a diff guard there.
Re: Bash Plates
Posted: 11 Oct 2014 07:52
by David M
Transfer case protection plate and diff guard please. Both raw steel.
Re: Bash Plates
Posted: 12 Oct 2014 07:27
by Clem
Peter Connan wrote:Gentlemen, I do not do a diff guard for the rear diff, for the following reasons:
1) The front of the diff doesn't need one.
2) The diff-lock solenoid is too close to the panhard rod, there is no room for a diff guard there.
Nou ja dan, al een asseblief Piet!
Re: Bash Plates
Posted: 03 Jan 2015 08:42
by SJC
Would the same bash plate, skidplates, etc. fit on the patrol pickup?
Re: Bash Plates
Posted: 03 Jan 2015 08:57
by Peter Connan
The ones you are looking at, yes they do.
The older Y60 ones, not.
Re: Bash Plates
Posted: 12 Apr 2015 21:51
by DaleB
Please let me know when you plan another batch. I would like a set for my 2008 3.0di with TJM front bumper.
Cheers,
Dale
Re: Bash Plates
Posted: 11 Feb 2016 13:57
by Oellie
Hi Peter
Wil hoor of jy nog bash plates maak, soek vir n 2005 4.8 GL
Dankie.
Re: Bash Plates
Posted: 12 Feb 2016 18:58
by Peter Connan
Oellie ek't jou ge-PM
Re: Bash Plates
Posted: 16 May 2016 17:27
by SJC
Piet kan jy vir my 'n beskermer(guard/slide) vir die bladvere se mounts ontwerp?
Dit kan seker teen 'n 30-35 grade hoek wees?
Re: Bash Plates
Posted: 16 May 2016 18:25
by Peter Connan
Ek sal by Tinus hoor of ek sy bakkie kan leen Fanus