Big Country bash plate

[Kagiso II]

Mmmmmm - ek kanni ekla nie - is presies wattik gereken het - kan jy vi oompie samblief aagter, onder "eye lets" bywerk om die grassnette te haak?
O-ja - en vir een en almal wat die Kgalgadi, Botswana of Boesmanland aanvat - stop kort-kort en maak skoon onder AMPER het ek mny Brutus aan die brand gesteek annerjaar ... in Botswana

gras1.jpg (176.26 KiB) Viewed 1941 times

gras5.jpg (198.76 KiB) Viewed 1941 times

Sien jy? styf teen die uitlaat / You see? Right against the exhaust

gras.jpg (186.58 KiB) Viewed 1941 times

gras4.jpg (182.54 KiB) Viewed 1941 times

[Peter Connan]

Izak dis reg so, ek het net 'n vergadering tussen 0900 en 11h00, so dit moet voor of na dit gebeur, en ek hoop dit reen nie.

Oom Mac, sal 'n plan maak.

Anybody else got any other requirements/improvements that won't push the price up too much?
Peter

[Izak]

Is Cool, ek sal na 1100 da weees

[Peter Connan]

Hello Guys, I have hit a small snag:

I have discvovered that a Y61 is not necessarily a Y61. What I mean by that is that the Y61 is built on a modified Y60 chassis. Nissan have welded on extra bits to the old Y60 chassis to suit the new body/engine combinations.
The problem is that the bits they have welded on are not always the same. The older, more rounded shape with the 3l diesel engine has straight extensions welded onto the old chassis to make the legs longer, while the 4.8 (both the older rounded shape and the current shape have an additional cross-member welded to the front of the chassis, fabricated from square tube that bends down in the middle and has a small plate bolted on to protect the radiator.

My problem is that I do not currently know what chassis is used on the 4.2 Diesel (looking at David's pictures it appears to be the same as the 3l, but I am not 100% sure), the 4.5l and the new-shape 3l diesel, although I hope to have that one identified later today. Is there anybody with a 4.5 around who can visit me to check it out? Wilfred are you in SA?

JG, as jy een wil he dink ek ons moet ook net seker maak wat onder jou kar aangaan?

Pieter hoe kan ek jou help?

[JG Shields]

Peter,

Koste... en sal fotos werk om vas te stel?

Kon jy dalk al 'n koste bepaal op die skarnier stelsel van die awning?

[Peter Connan]

Hello JG

Foto's is moeilik, want daar is baie keer covers en goed op wat mens moet probeer uitvind wat agter dit gebeur. Koste is ook nog moeilik, maar ek verwag omtrent R1k, maar nie meer as R1.5k nie.

Oom Mac is besig om 'n kwotasie vir die seilwerk op die awning te kry sodat ons 'n volledige produk kan lewer. Dis net moeilik om die tyd van die jaar kwotasies te kry want almal wil net op vakansie gaan.

[Ruben]

Hi Peter,

Ek stel ook belang in die BAsh Plate. Het jy al verder gevorder met jou ontwerp en vervaardiging? Ek het die 1999 4.5 model.

Nogmaals dankie,

[ChristoSlang]

Peter, ek dink so iets sal ook mooi werk onder aan Chuck Norris se neus!

Do you need a TD42 Y61 to volunteer for measurements?