Clueless and in need of Technical Advice.
- tour de frans
- Patrolman
- Posts: 797
- Joined: 03 May 2009 19:48
- Been thanked: 22 times
Re: Clueless and in need of Technical Advice.
Hi,is jou kar al gefix? Ek kan n bietjie help.
Groete
Frans
Groete
Frans
Gu y61 wagon- 6.0L chevy
Gu y61 pickup- 6.2L chevy
Tour de frans - het niks met n bicycle uit te waai nie.
Gu y61 pickup- 6.2L chevy
Tour de frans - het niks met n bicycle uit te waai nie.
-
- Senior Member
- Posts: 164
- Joined: 26 Aug 2010 11:07
- Full Name: Kevin Mason
- Nickname: Kevin
- Home Town: Kiev
- Current 4x4: 1994 Nissan Patrol 4.2TD
- Home Language: English
Re: Clueless and in need of Technical Advice.
Margo:
Did you ever get the clutch problem fixed? I am not the greatest auto mechanic, but I second the advice of whoever said that if your Patrol starts eating fuses regularly, best to get to the root of the problem and not just keep feeding it fuses.
Did you ever get the clutch problem fixed? I am not the greatest auto mechanic, but I second the advice of whoever said that if your Patrol starts eating fuses regularly, best to get to the root of the problem and not just keep feeding it fuses.
Патроль - эта вечная машина!
- Saltman
- Moderator
- Posts: 281
- Joined: 04 Apr 2009 16:03
- Full Name: Herbie Hellstrom
- Nickname: Saltman
- Home Town: Durbanville, Western Cape
- Current 4x4: Land Rover Discovery Series 3 TDV6 Auto
Land Rover Discovery Series 1 Tdi.
Land Rover Discovery Series II Td5 - Home Language: Afrikaans / English / German
- Location: Durbanville, Western Cape
Re: Clueless and in need of Technical Advice.
Hi Margo
Welcome to the forum and may you sort out the niggles quickly!
Here is another possible angle for your shudder problem:
Does it only happen in first when pulling away or does it happen in reverse as well?
If so there is the possibility that the oilite or fosfor bronze (not quite sure which version Nissan uses) pilot bush in the centre of the flywheel was not replaced, ran dry or was fitted skew. A dry bush will cause a friction type shudder, Check with the people who replaced the clutch whether they replaced the bush as well!
Good luck
Herbie
Welcome to the forum and may you sort out the niggles quickly!
Here is another possible angle for your shudder problem:
Does it only happen in first when pulling away or does it happen in reverse as well?
If so there is the possibility that the oilite or fosfor bronze (not quite sure which version Nissan uses) pilot bush in the centre of the flywheel was not replaced, ran dry or was fitted skew. A dry bush will cause a friction type shudder, Check with the people who replaced the clutch whether they replaced the bush as well!
Good luck
Herbie
Saltman:
One foot in Land Rover land and one foot in Patrol land and the sensitive bits are hanging in the salty sea in between!
One foot in Land Rover land and one foot in Patrol land and the sensitive bits are hanging in the salty sea in between!
- Stefan
- Moderator
- Posts: 1692
- Joined: 28 Apr 2009 08:43
- Full Name: Stefan de Villiers
- Nickname: Stefan
- Home Town: Bothasig, Cape Town
- Current 4x4: 2002 3.0 GL Patrol
- Home Language: Afrikaans
- Location: Cape Town
- Has thanked: 175 times
- Been thanked: 50 times
- Contact:
Re: Clueless and in need of Technical Advice.
You can take the bush out of the Patrol, but never take the Partol out of the bush... or is it the other way round?
- Margo
- Senior Member
- Posts: 107
- Joined: 06 Oct 2010 06:42
- Full Name: Margo Welge
- Nickname: Marg's
- Home Town: Muldersdrift
- Current 4x4: 2000 Nissan Patrol 4.5 GRX
- Home Language: English
Re: Clueless and in need of Technical Advice.
Hi Herbie, Frans, Stefan and Mrowka :)
Thank you for your responses.
Frans, I have received your pm, thank you so much, will contact you later today if that is still ok?
Clutch: Still does the shudder thing in first gear. Now second gear as well. I have also picked up a vibration noise in low revs. I am at the point of complete frustration now that I put the music on really loud so i dont have to hear the noise. As for the shudder, I try drive different ways to see what works better for the shudder. I am not prepared to let the mechanics near my car again (the guys that changed the clutch) because it just seems to get worse everytime they work on it. So will have to fork out again to get it fixed properly this time.
Rough Idle / Spluttering: Idling needle stays still, does not move, but idling is very rough. Sitting in the car, you feel it and hear it. Almost as though the car is going to stall. Ikky!!!!!
I sent my car in to another mechanic, said that the power loss between 2 and 3 thousand revs was due to my timing being retarded. They fixed this. Was better for all of two weeks and has started doing it again, itermittently. SO bizarre!
Oh and the Fuses: have not popped again. Had an auto electrician have a look at car... found an exposed wire, fixed it and is all better now :)
Shoooweeee.
Thank you for your responses.
Frans, I have received your pm, thank you so much, will contact you later today if that is still ok?
Clutch: Still does the shudder thing in first gear. Now second gear as well. I have also picked up a vibration noise in low revs. I am at the point of complete frustration now that I put the music on really loud so i dont have to hear the noise. As for the shudder, I try drive different ways to see what works better for the shudder. I am not prepared to let the mechanics near my car again (the guys that changed the clutch) because it just seems to get worse everytime they work on it. So will have to fork out again to get it fixed properly this time.
Rough Idle / Spluttering: Idling needle stays still, does not move, but idling is very rough. Sitting in the car, you feel it and hear it. Almost as though the car is going to stall. Ikky!!!!!
I sent my car in to another mechanic, said that the power loss between 2 and 3 thousand revs was due to my timing being retarded. They fixed this. Was better for all of two weeks and has started doing it again, itermittently. SO bizarre!
Oh and the Fuses: have not popped again. Had an auto electrician have a look at car... found an exposed wire, fixed it and is all better now :)
Shoooweeee.
- Stefan
- Moderator
- Posts: 1692
- Joined: 28 Apr 2009 08:43
- Full Name: Stefan de Villiers
- Nickname: Stefan
- Home Town: Bothasig, Cape Town
- Current 4x4: 2002 3.0 GL Patrol
- Home Language: Afrikaans
- Location: Cape Town
- Has thanked: 175 times
- Been thanked: 50 times
- Contact:
Re: Clueless and in need of Technical Advice.
Glad to hear that you got the electrics sorted. Where was the exposed wire?
If it was me, I would keep taking the car back to the people already paid for the work and get a laywer involved if needed
If it was me, I would keep taking the car back to the people already paid for the work and get a laywer involved if needed
- Herrie
- Patrolman 1000+
- Posts: 2999
- Joined: 08 Apr 2009 07:17
- Full Name: Kobus Pienaar
- Nickname: Herrie
- Home Town: Kempton Park
- Current 4x4: 1999 Patrol 4500e GRX
1983 Datsun Safari - Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 55 times
- Been thanked: 94 times
Re: Clueless and in need of Technical Advice.
At one stage mine did on idle nicely and I found that some ofthe plugs were loose. Eventually found that there were carbon dust between the plug and the head so I vacumed it and put the plugs back - problem solved!!
Herrie op Safari/Patrollie
1983 Safari
1999 Patrol 4500 GRX
1983 Safari
1999 Patrol 4500 GRX
- Margo
- Senior Member
- Posts: 107
- Joined: 06 Oct 2010 06:42
- Full Name: Margo Welge
- Nickname: Marg's
- Home Town: Muldersdrift
- Current 4x4: 2000 Nissan Patrol 4.5 GRX
- Home Language: English
Re: Clueless and in need of Technical Advice.
Hi Stefan,
Thanks for the reply. I am not sure where the wire was, I never asked (suppose i should have) As for the mechanics. I really dont want to take my car back to them, they dont listen to me. They insist that there is nothing wrong with the clutch. So i really dont know what else to show or say to them. It is difficult when he starts speaking in mechanical terms that i dont understand. I know the basics, but when it gets to the gritty stuff, I am lost! BLEH at them!
Thanks for the reply. I am not sure where the wire was, I never asked (suppose i should have) As for the mechanics. I really dont want to take my car back to them, they dont listen to me. They insist that there is nothing wrong with the clutch. So i really dont know what else to show or say to them. It is difficult when he starts speaking in mechanical terms that i dont understand. I know the basics, but when it gets to the gritty stuff, I am lost! BLEH at them!
- Margo
- Senior Member
- Posts: 107
- Joined: 06 Oct 2010 06:42
- Full Name: Margo Welge
- Nickname: Marg's
- Home Town: Muldersdrift
- Current 4x4: 2000 Nissan Patrol 4.5 GRX
- Home Language: English
Re: Clueless and in need of Technical Advice.
Hi Herrie, Thank you for your suggestion and reply. I had the plugs replaced and the bogi cords and had the carbon dust cleaned out as well. Maybe they did it wrong?
-
- Full Member
- Posts: 41
- Joined: 06 May 2009 16:48
- Full Name: Chris de Villiers
- Nickname: Trailerman
- Home Town: Pretoria
- Current 4x4: Nissan Patrol 4,8 GRX
- Home Language: Afrikaans
- Location: Pretoria
- Contact:
Re: Clueless and in need of Technical Advice.
Hi Margo
Welkom by die site!
Kyk bietjie of die air-intake pyp vanaf die air filter nog heel is. Myne het met die branch 'n gat ingesmelt agv. van die ouens wat nie die heat cover terug gesit het nie. Baie sleg ge-idle omdat die air flow meter nou deurmekaar is met die lug mengsel.Gesmelte pyp uitgehaal en vervang met 'n 76mm staal pyp. Probleem opgelos en trek soos hy moet.
Terloops, die branch is ook uitgehaal en soek 'n nuwe eienaar ( R1000.00 ). PM my as iemand belang stel!
Ek het verlede jaar my Patrol se clutch vervang vir R3500, so die prys klink vir my reg. Net jammer ek het daarna uitgevind dat die Cabstar trok se clutch blykbaar ook sal werk.
Groetnis
Welkom by die site!
Kyk bietjie of die air-intake pyp vanaf die air filter nog heel is. Myne het met die branch 'n gat ingesmelt agv. van die ouens wat nie die heat cover terug gesit het nie. Baie sleg ge-idle omdat die air flow meter nou deurmekaar is met die lug mengsel.Gesmelte pyp uitgehaal en vervang met 'n 76mm staal pyp. Probleem opgelos en trek soos hy moet.
Terloops, die branch is ook uitgehaal en soek 'n nuwe eienaar ( R1000.00 ). PM my as iemand belang stel!
Ek het verlede jaar my Patrol se clutch vervang vir R3500, so die prys klink vir my reg. Net jammer ek het daarna uitgevind dat die Cabstar trok se clutch blykbaar ook sal werk.
Groetnis
Groetnis
Who is online
Users browsing this forum: Bing [Bot] and 1 guest