Speedometer dead
Posted: 22 Aug 2021 20:32
After a long time: hi again.
I have not been in your country since more than 17 month - the reason should be known....
So I have only a question concerning my german Patrol (y60, 1992, RD28, LHD, rear diff lock)
Some weeks ago I noticed a "strange" speed: in the middle of the city it showed 140 hm/h. Then 180, then nothing.
OK, I bought a new used speedometer - different behavior: most times 0 or 80.
I removed the speedometer sensor and the pinion (correct word?) insider the gearbox. Pinion seems to be OK. I checked the sensor: seems to be OK. I see some volt on the voltmeter. oscilloscope says OK.
But I ordered a new one in Dubai: but same results. I used a drill on the sensor to check the function: but nothing.
So the only idea: both speedometers are broken or a broken cable.
But how can I check a broken cable? The 2 cables of sensor are vanashing somewhere in the "cable-collection" (do not know the correct word) and they come back in 4 big plugs.
I have a electric plan, but there are 2 different possible types.
I tired to connect a sensor directly to the speedometer, without success - and the question is: did I connect correct?. Maybe works only when everything is connected? but then I can not connect my cable from the speedometer.
HELP NEEDED IN GERMANY!
Frank
(the first pic shows the bought used speedometer. Normally I do not disconnect plugs this way
)



I have not been in your country since more than 17 month - the reason should be known....
So I have only a question concerning my german Patrol (y60, 1992, RD28, LHD, rear diff lock)
Some weeks ago I noticed a "strange" speed: in the middle of the city it showed 140 hm/h. Then 180, then nothing.
OK, I bought a new used speedometer - different behavior: most times 0 or 80.
I removed the speedometer sensor and the pinion (correct word?) insider the gearbox. Pinion seems to be OK. I checked the sensor: seems to be OK. I see some volt on the voltmeter. oscilloscope says OK.
But I ordered a new one in Dubai: but same results. I used a drill on the sensor to check the function: but nothing.
So the only idea: both speedometers are broken or a broken cable.
But how can I check a broken cable? The 2 cables of sensor are vanashing somewhere in the "cable-collection" (do not know the correct word) and they come back in 4 big plugs.
I have a electric plan, but there are 2 different possible types.
I tired to connect a sensor directly to the speedometer, without success - and the question is: did I connect correct?. Maybe works only when everything is connected? but then I can not connect my cable from the speedometer.
HELP NEEDED IN GERMANY!
Frank
(the first pic shows the bought used speedometer. Normally I do not disconnect plugs this way



