Rear coil spring tower braces

User avatar
Chukkie
Junior Member
Junior Member
Posts: 10
Joined: 06 Mar 2012 13:50
Full Name: Gerard Schuite
Nickname: Chukkie
Home Town: Struisbaai
Current 4x4: Nissan Patrol 4.8 grx
Home Language: Afrikaans
Been thanked: 1 time

Rear coil spring tower braces

Post by Chukkie »

I noticed that my left coilspring top brace started to tear. I previously also had the same problem with the right side which I repaired. I also found on the internet that this is a bit of a flaw in the GU design. Is there anyone in the RSA that manufacture braces. Would prefer to buy/support local rather that importing from Aus.
Gerard
Patrol 4.8 GRX
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Rear coil spring tower braces

Post by ricster »

I think Peter Connan makes a tower brace, but I think a body lift is also needed, but I'm sure Peter will jump in if I am wrong.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Rear coil spring tower braces

Post by Peter Connan »

ricster wrote: 15 Feb 2021 09:01 I think Peter Connan makes a tower brace, but I think a body lift is also needed, but I'm sure Peter will jump in if I am wrong.
Correct on all counts.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
hugejp
Patrolman 1000+
Patrolman 1000+
Posts: 2052
Joined: 21 Oct 2014 21:01
Full Name: JP Viviers
Nickname: Oupoot
Home Town: JHB
Current 4x4: THE PATROL COLLECTION
2004 4.8 GRX TURBO "Tinkerbell"
2003 TD42T GRX "The Coal Roller"
Home Language: Half & Half
Has thanked: 211 times
Been thanked: 217 times

Re: Rear coil spring tower braces

Post by hugejp »

@Peter - what is the minimum lift needed? & can this be something you include in the kit? Cost all in with spacers?
----------------------------------------------------------------------

You CAN with a NISSAN!

Jy KAN met 'n DATSUN!
User avatar
Chukkie
Junior Member
Junior Member
Posts: 10
Joined: 06 Mar 2012 13:50
Full Name: Gerard Schuite
Nickname: Chukkie
Home Town: Struisbaai
Current 4x4: Nissan Patrol 4.8 grx
Home Language: Afrikaans
Been thanked: 1 time

Re: Rear coil spring tower braces

Post by Chukkie »

What is the reason for the bodylift?

If I look at the Aus brace it fits inside the existing one, so no bodylift required. Please correct me if I'am wrong.

My problem with the bodylift is that currently I just clear my garage door (5mm spare).
Gerard
Patrol 4.8 GRX
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Rear coil spring tower braces

Post by Peter Connan »

There are several different braces sold in Australia.

The one I make is similar to the Superior Engineering one, and bolts across the top of the two coil towers.

But the brake and fuel lines run over the right-hand-side coil tower, and the body lift is needed so as not to crush them. I think one could get away with about a 10mm lift. I will be able to include the spacers in the kit but will need to have a good look at a few Y61's to determine whether I will also need to supply longer bolts.

However, if yours are already starting to tear, fixing it will be a body-off job, and as such it may be best to fabricate something similar to what this guy did:

That could be done such that a body lift is not needed, and looks super strong.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Rear coil spring tower braces

Post by ricster »

Chukkie wrote: 15 Feb 2021 10:29 What is the reason for the bodylift?

If I look at the Aus brace it fits inside the existing one, so no bodylift required. Please correct me if I'am wrong.

My problem with the bodylift is that currently I just clear my garage door (5mm spare).
I had the same problem.... I had the best solution to that problem. I built myself a new 7500mm deep x 6500mm wide garage with a 2465mm high garage door. I can now load my roofrack with RTT onto the Patrol in the garage from the Franklin hoist suspended from the roof trusses.... :biggrin: It makes life sooooo much easier. So there is never problems only solutions.... :rolling: :rolling: :rolling:
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
Chukkie
Junior Member
Junior Member
Posts: 10
Joined: 06 Mar 2012 13:50
Full Name: Gerard Schuite
Nickname: Chukkie
Home Town: Struisbaai
Current 4x4: Nissan Patrol 4.8 grx
Home Language: Afrikaans
Been thanked: 1 time

Re: Rear coil spring tower braces

Post by Chukkie »

Thanks for all the responses.

@Peter What is your opinion on these: https://www.partsman.com.au/boss-coil-t ... -gq-gu-wag.

@ ricster: Building a new garage is just not an option. Firstly funding & secondly the municipality will not allow any more buildings on my property as I am already over the allowed %.

Thus I must look at alternatives.
Gerard
Patrol 4.8 GRX
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Rear coil spring tower braces

Post by Peter Connan »

Those react all the force the standard coil towers can't handle into two little M8 bolts, as a shear load, and at a relatively short lever arm.

As such I don't think that they will help all that much.

Also, they sit between the springs and the towers, and as such they will also raise your car by the plate thickness, which is probably between 5 and 8mm. So if you really only have 5mm, you will already be in trouble.

I don't like welding on chassis, because it is impossible to repair the rustproofing inside the chassis afrer welding. But since you already need to weld to repair the issue, I honestly believe adding a strap from the edge of the spring tower to the cross-members in front off and behind the axle.

They need not be nearly as substantial as the ones in the video I linked earlier to be a hell of a lot stronger than that bolt-on solution.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Chukkie
Junior Member
Junior Member
Posts: 10
Joined: 06 Mar 2012 13:50
Full Name: Gerard Schuite
Nickname: Chukkie
Home Town: Struisbaai
Current 4x4: Nissan Patrol 4.8 grx
Home Language: Afrikaans
Been thanked: 1 time

Re: Rear coil spring tower braces

Post by Chukkie »

Thanks Peter
You gave me a lot to think about and I need to make some serious measurements before I decide on the way forward.
Really appreciate the time in answering my questions.
Will update on my progress.
Gerard
Patrol 4.8 GRX
Post Reply

Return to “12. Suspension, Steering & Brakes”

Who is online

Users browsing this forum: No registered users and 3 guests