Nissan Patrol 4x4 (Africa)

I started on the storage and fridge slides in the back of my truck(eventually), and when I started looking for heavy duty slides, it turned out to be a bit of a mission. I was looking for roller slides, full extention up to a metre with a combined wt rating of at least 180kg. I eventually found some this morning ata very good price, because this company discontinued this line. There is still 12 pairs left.
Anybody interested, let me know.

Can you post a pic or 2????

Deon please let me know the costing I am interested to do a slide for my "yskas"

and gooi some pictures as my partner in crime has requested if possible


Shalom
Jules

Which company was that - Furnlock??

furnlock is te duur (R457 per paar). Hierdie was R199/pr by Gelmar in Silverton. Daar is nog 12 pare beskikbaar, maar hulle gaan nie weer invoer nie. Die oorspronklike prys was R395/pr. I will post more pics as the work progress. Dinge gaan maar stadig. Tyd is min na werk en naweke is heeltemal te kort!

Deon ek wil nou ndom vraag vra maar hoe werk daardie slider sal mens dit plat monteer en dan sit jy n plaat op om die yskas optesit, ek stel defnitief belang sal kyk of ek my aanstaande skoonseun kan kry om n stel te koop, verstaan ek die prys reg dat vir R200 kry jy 2 van die sliders.

Waar is Silverton, is dit in Pretoria omgewing of Johies

Shalom
Jules

Hi Jules,
Plek se naam is Gelmar, hoek Dykor en Moreleta str, Silverton,Pta. Prys is R200/pr.

Dit hang af van waar jy die slide wil insit, maar jy sal 'n raam moet bou van angle, dan die slides vasbout aan die angle, dan meet jy hoe groot die raam vir die yskas moet wees. Ek het gou 'n rowwe tekening in paint gedoen.

Times are few and work is plenty. I eventually got the slides in the frame, the frame finished and the wood cut for all the panels. also covered the rear door panels and sides with carpet.
some more pics

At long ,long last!! I finished the slide/packing system in the rear.
Just a note of thanks to all the previous projects before mine and all the pictures where I got my ideas from. The last pisc. The total cost for materials is just under R3k, now I'm looking forward to the next project.