Page 1 of 2

Dastek unichip

Posted: 13 Mar 2012 05:18
by Reinier Claasen
Hi I recently bought a Patrol witch had a dastek unichip in. Soon I had trouble with the vehicle shuddering and performed totally as if there is no fuel. Took it to Bosch and the computer said straight away it was the MAF. After checking it out the were sure that it was not the problem but in fact the unichip. I had them remove the chip and all the problems were solved. Is this a common thing and can the chip be re-installed? Does these chips go faulty and if so can they be repaired?

Any ideas? :think:

Re: Dastek unichip

Posted: 13 Mar 2012 06:23
by Tinus lotz
The guy to speak to will be Frans mabe Grootseun can help to :mytwocents:

Re: Dastek unichip

Posted: 13 Mar 2012 14:47
by Grant
Renier,

Take it to SAC Diesel and talk to Myndard. 0828899974. He will be able to help you.

Re: Dastek unichip

Posted: 14 Mar 2012 10:22
by tour de frans
Good Day
Dankie Tinus. Take the chip to Dastek themselves. I be leave you are from that area. They will test it and replace if under warranty.
Rdgs.

Re: Dastek unichip

Posted: 12 Apr 2012 13:19
by Reinier Claasen
Took the chip to the Dastek guys in George. They checked it out and found that it was the harness that was faulty. Probably rust. Replaced it and re-installed the chip. Problem solved. Increased my fuel consumption from 5.4 km/l to 6.3km/l. :mytwocents: :blonde: :clap:

Re: Dastek unichip

Posted: 12 Apr 2012 14:37
by Grootseun
Glad they sorted it for you , Pieter De Weerdt the inventor of the unichip and owner of dastek takes great pride in the qaulity of the chip so i was sure they would be able to fix it for you

Re: Dastek unichip

Posted: 12 Apr 2012 16:50
by Tinus lotz
glad you came wright :woo: :woo: :woo: :woo:

Re: Dastek unichip

Posted: 12 Apr 2012 21:09
by KEENO
Reinier,

Who do you use in George?

Re: Dastek unichip

Posted: 13 Apr 2012 06:23
by Reinier Claasen
KEENO wrote:Reinier,

Who do you use in George?
Dr. Quinzy's is the official Dastek agent in George. In the industrial area.

Re: Dastek unichip

Posted: 13 Apr 2012 10:56
by KEENO
Thanks Reinier, was there and will be taking the Trol in soon.