Nissan Patrol 4x4 (Africa)

Posted: **15 Jul 2021 16:45**

NoPressure wrote:I was looking for genuine Nissan 4.6 crown wheel and pinions but couldn't find any, especially for the H260. Would of been my 1st choice as well. Where did you source yours?

I got mine through Tinus, had it fitted by Collin in Jetpark. Contact Tinus, he has all the detail.

Sent from my iPhone using Tapatalk

Posted: **15 Aug 2021 18:50**

A few months ago I bought a Bunco rear bumper that became available. The bumper came all the way from the West Coast and I knew it would need some refurbishing as I wanted to change the existing round lights.

So the work started, cutting out the round lights and highlift jack points to weld in new plate for a smooth area to fit new bakkie LED lights and new triangle shape recovery points.

My welding skills are crap to say the least, so Tinus jumped in to assist and safe the project.

The rear bumper was then send for sandblasting and power coating.

Sent from my iPhone using Tapatalk

Posted: **15 Aug 2021 18:59**

Fitment time, but first we had to strip off the existing and clean the chassis:

With the initial fit I discovered a gap in the centre where the recovery point attach to the chassis of 135mm…. A call to Peter Connan informed me that a face lift covered this with a spacer fitted to the chassis that made up the gap. In typical Mr Connan style this created an opportunity for fabrication of a spacer:

In the end the rear bumper was fitted with two M16 bolts on the sides and four M12 bolts in the centre.

Before the new bumper:

After:

Sent from my iPhone using Tapatalk

Posted: **15 Aug 2021 19:02**

Oetie wrote:So, after my previous post on who drives their Patrol's on a daily basis, I received the message from Thinus that I can come and collect him

So late afternoon I collected Tlou, a dream come true!!

IMG_6385 (2).JPG

IMG_6382 (2).JPG
As you can see, it is a clean slate.... some planning and dreaming to do to fit him, but first he will go for a visit to Michael to check him over and let me know what I should look out for (eventually we will get to having a turbo done and to let Anthony fit a Madman.

To do in no specific order:
- Second battery
- Drawers in the back
- Having the hail dents removed on the bonnet and to fix the few chip marks there are and at the same time having the rims painted black
- Suspension
- Tyres
- Tow bar
- Bull bar
- Roof rack

So I drove Tlou home on 14 November 2018, in close to 3 years the vehicle has come a very long way:

And this is not the end…

Sent from my iPhone using Tapatalk

Posted: **16 Aug 2021 06:59**

It has really transformed! Looks awesome!

Posted: **16 Aug 2021 14:52**

Nice Leon. Glad you got the bumper all sorted. Looks really good

Posted: **16 Aug 2021 14:52**

jonathan wrote: ↑16 Aug 2021 14:52 Nice Leon. Glad you got the bumper all sorted. Looks really good

Thank you Jonathan!!

Posted: **14 Oct 2021 18:17**

The Patrol is not known for proper coffee mug space, so I removed the ash tray as I do not use it, and initially with carton crafted a model that will have space for bigger and proper (Stanley) coffee mugs. My neighbor then offered to print the design for me with his 3D printer and here is the result:

: CHolder01.jpg (1.34 MiB) Viewed 7888 times

: CHolder02.jpg (2.11 MiB) Viewed 7888 times

There is a space for a USB charger to fit that I still have to do. Used it to Goerapan and back and it works, so I am happy with the result.

Prior to Goerapan I also ordered an "In-betweenie" from Mark at 4x4 Assist after seeing his photo's on social media. I find this another handy piece in the vehicle for water bottles, mugs, handheld radio's etc:

: IBTweenie01.jpg (2.33 MiB) Viewed 7888 times

Posted: **16 Sep 2024 12:30**

So I realised that I have not updated the progress and additions to my Patrol for a significant period of time.... close to 3 years....

Let's start with the rear/tow bar. I managed to bent the refurbished Burnco rear bar at a SARZA event when I towed a Megabus off a gravel hump the engine in the rear was caught on. Tuffstuff approved an insurance claim and the refurbished towbar was replaced with a towbar and spare wheel swing arm from BZT:

At the same time I had the rear ladder added:

Some time ago (think it was in 2022 shortly after the Goerapan gathering, I added the BZT awning:

Posted: **16 Sep 2024 12:36**

On the inside I added a drawer and fridge slide. The original design was a bit complicated where the fridge slides out and down with the kitchen drawer extended. Great idea, but as I said a bit complicated to execute. So I removed it and went for a straight slide in and out for the fridge build with 25mm connect-it all from Maizeys, also at the same time added a shelve on the top for kitchen appliance, food etc. The table just folds out secured by a single leg and so far so good:

The drawer on the left takes up all the recovery kit, tools, 12v pump, hose and indeflate:

I no longer had view through the rear windows and opted to make use of the space:

Nissan Patrol 4x4 (Africa)

Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42

Re: Tlou - My TD42