Page 2 of 3
Re: Source for Y61 REAR Brake Pads
Posted: 15 May 2013 22:02
by Kagiso II
Those alternative brake pads for the Trol -- get tge pads of the MAZDA ETUDE -- you have to grind a tiny wee little bit off at one corner -- but the it works 100 % [same material - same thickness as the Patrol item that Nissan flocks you with
AGAROB has a set -- and I assume he still stops with it [Christo het nognie gekla nie .. :-) ]
Re: Source for Y61 REAR Brake Pads
Posted: 15 May 2013 22:37
by ricster
Yip .... I've used the Mazda Etude brake pad for the rear of the Patrol ( Ferodo Platinum ). I just filed down the metal ear on the ends of the pad and they slipped in like a glove!!... and a fraction of the price !!
Re: Source for Y61 REAR Brake Pads
Posted: 16 May 2013 06:35
by AndriesS
4.5

but 4.8

could not find anything in the catalogue that will work without serious mod. These days I always ask for discount from Nissan main stealer. It's not that the carry any of the parts so they don't have any expenses on it!
Re: Source for Y61 REAR Brake Pads
Posted: 18 May 2013 18:11
by jeanne.volschenk
HI guys ,
SAFELINE is as good as Ferodo, I use both on my NP300's & Patrols. Thanks for info on Alternatives.
Cheers
JV
Re: Source for Y61 REAR Brake Pads
Posted: 18 May 2013 21:08
by ChristoSlang
I went with these ATE brakes on the rear of Chuck - also meant for the front of an Astina if I'm not mistaken:

- Friction material is identical
- ATE 857 1.jpg (51.81 KiB) Viewed 5344 times

- Backing plates are different
- ATE 857 2.jpg (182.55 KiB) Viewed 5344 times
I used an angle grinder to trim away the steel marked in red.
A file would have taken way too long, but Cedric is much stronger than I am and he probably has a better file too!

Re: Source for Y61 REAR Brake Pads
Posted: 20 May 2013 08:26
by ricster
Huh??.... I never cut away that much steel!!! I think I still have the old pads....I will go have a look...

Re: Source for Y61 REAR Brake Pads
Posted: 04 Jun 2013 22:26
by Mokobi
Got mine fitted last week and had to cut the bottom only as per pic above. Used a hack saw

I think I used Mazda 323 MK VI - part number Ferodo FDB1455

Re: Source for Y61 REAR Brake Pads
Posted: 21 Nov 2013 15:38
by Dungbeetle
I took my rear pads to Midas
The salesman took a product catalog with 1:1 scale drawings and matched mine
If I remember correctly the match was Nissan Sentra/Almeida front pads for a steal. We had to grind away one small corner 5x5mm and fitted it.
That was about 30000km ago......
When I need to replace again I will make sure to remember the exact match and post it here.
Re: Source for Y61 REAR Brake Pads
Posted: 21 Aug 2023 20:02
by Witbobbejaan
Y61 TB45E 2001 GL:
Nissan Pads rear set (D4060VB1X0) = R705 excl VAT
Nissan Pads rear harware kit set (44080VB225) = R1,977 excl VAT
Terrain Tamer rear pads set = R1,677
Re: Source for Y61 REAR Brake Pads
Posted: 21 Aug 2023 20:33
by mvcoller
Witbobbejaan wrote: ↑21 Aug 2023 20:02
Y61 TB45E 2001 GL:
Nissan Pads rear set (D4060VB1X0) = R705 excl VAT
Nissan Pads rear harware kit set (44080VB225) = R1,977 excl VAT
Terrain Tamer rear pads set = R1,677
Your first two lines of your statement make no sense.....