Peter Connan wrote: ↑10 Jan 2020 04:57
I have a BF 33 for you David.
Lots of thread left, but it is quite old in years and has a plugged sidewall puncture. However it has been lying under my workbench all the time, is mounted on a pro-white wheel and has been holding pressure for probably 7 years.
Rim can be included.
Morning Peter
Thanks for the offer... Is that a 15" tyre/rim?
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS
Yes. 33 x 12.5 x 15. Not sure of the rim width and offset.
You can have the tire for free (assuming you have it removed from the rim at your cost) or the tire and rim for R1200.00
Rim has been used very little (was carried as a second spare for one trip and used to test my trailer a little bit) and has no dents. Straight as it ever was.
Thanks Peter. Let me see how things go this side. I have two spare rims here at the moment, and will only want to take the tyre. My priority right now, however, is to get the Sani sorted for the trip. Lots of work to do, and spent the day on the road just sourcing some more steel and bits and pieces. Out here in the sticks, simple 5mm-6mm flat bar 100mm wide is a problem to find. Tomorrow I have to try and borrow a car again, and go look in Potch to see if I can find anything.
I'll keep you posted how things develop here. I am trying to fit a full house packup/sell off, and major vehicle work, all by the end of the month.
David - Bfreesani
1997 Nissan Sani MK3 2.7TD - Hillbilly (SAFANI)
MQ C200 SFA
MQ H260 LSD Rear
MQ Transfer as second low range
5" Lift
33"x12.5x15" tires on 8.5J rims - Want 35's
DIY rock sliders
DIY Snorkel
Madman EMS