Bash Plates

Bullbars, roof racks, suspensions and other accessories relating to vehicle performance
Post Reply
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Bash Plates

Post by Peter Connan »

Hello Ladies and Gentlemen

To try and limit confusion, I have decided to start a new thread on this. Also, my apologies for the long delay.

I have now had the opportunity to measure a wide variety of Patrols, and I am reasonably confident that I can now manufacture a bash plate for any Y60 or Y61 patrol. Basically, there are three variants. These are the Y60, the Y61 with all engines except the 4.8, and then the 4.8. Some aftermarket bumpers on the Y60 use the mounting points I would like to use, but on these the Y61 bash plate should fit. There is also a special version for the Y61 (non 4.8) with ARB bull bar which is longer and joins to the bull bar, specifically designed for Izak.

The bash plates are all manufactured from 5mm Mild steel. Prices for all the bash plates except the special Y61/ARB will be R850.00 in raw steel or R950.00 if you want it galvanized. The Y61/ARB will be R1100 raw or R1200 galvanized. Delivery should be around three weeks from the day I place the orders.

50% minimum deposited to FNB Woodbridge branch, account number 62246897659 (savings account) with proof of payment e-mailed to peterconnan@za.spiraxsarco.com secures your order.

Regards
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Bash Plates

Post by Peter Connan »

Sorry guys, I forgot to add:

Please also remind me what you drive (model, engine and bumper). This does not apply to the guys whose cars I measured.

Also, these bash plates are all designed to be able to accomodate two bow shackles for recovery purposes, and grass seed netting attachment points.

Thanks
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Wynvat
Senior Member
Senior Member
Posts: 120
Joined: 08 Apr 2009 09:44
Full Name: Gerhard van Rhyn
Nickname: Wynvat
Home Town: Centurion
Current 4x4: Patrol 4.8 GRX Y61 GU(4)
Home Language: Afrikaans
Location: Centurion
Been thanked: 1 time

Re: Bash Plates

Post by Wynvat »

Thanks Peter

Ordered, paid (50%) and e-mailed.

(Bashplate and Transfer Case Skidplate).

Regards,

Gerhard
2007 Patrol 4.8 GRX Tiptronic Y61/GU(4)
Africa does not break a Patrol. A Patrol breaks Africa.
User avatar
Tinus lotz
Moderator
Posts: 7579
Joined: 29 Aug 2010 13:07
Full Name: Tinus lotz
Nickname: Tinus lotz
Home Town: Centurion
Current 4x4: Nissan patrol 4.8 GRX 2005

Toyota 2.7 legend 35 LWB 4X4
Home Language: Afrikaans
Has thanked: 800 times
Been thanked: 549 times

Re: Bash Plates

Post by Tinus lotz »

hey piet moet ek eers n bumper opsit voor die bash plate sal pas ????
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Bash Plates

Post by Peter Connan »

Tinus the standard bash plate for your 4.8 will fit with every bumper I have yet seen.
For the guys with the other engines, basically the same goes. The bash plate will fit with every bumper I have seen, with the possible exception of ONCA, which has it's own bash plate.

Cheers
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Kagiso II
Patrolman 1000+
Patrolman 1000+
Posts: 3452
Joined: 10 Jun 2009 16:58
Full Name: Mac Mc Menamin
Nickname: Oom Mac [Uncle Mac] [Uncle] [Oompie] Kagiso
Home Town: BrentwoodPark, Benoni
Current 4x4: 1982 Datsun Safari 2,8 aka LOBO; [1,300,000 Km verby !]
'99 PATROL 4,2 diesel.
2012 Jimny [SWAMBO se Kantoor-toe]
Home Language: AFRIKAANS
Location: Benoni and wherever the Outreach takes me.
Has thanked: 299 times
Been thanked: 155 times
Contact:

Re: Bash Plates

Post by Kagiso II »

P/ter - se vi oompie, daai "underbelly" plate wat Agarob nou reeds het en die "bash-plate" wat nou oppad is - helle sal so saam-saam kan werk mos? ek meen, hulle gaan nie baklei oor vasmaak 'spots' nie??

BRILJANT van jou om die 'saadnet' ankers by te sit ... dit alleen is oorie honneert punte werd !!

Ek stoei nog steeds met Hennie vir pryse op die uitswaaidakkie se seile.. ek kry al skaam vir sy part.
Ek gaan Noorde se kant toe - ek sal dan ook by Tannie Miem stop en hoor wat sy kan uitrig.
Don't bring God down to your level of faith ... bring your faith up to His level!
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Bash Plates

Post by Peter Connan »

Dis reg Oom Mac, die twee plate baklei nie met mekaar nie.
Was oom saterdag by Hennops? Ons was daar, maar ek kon Oom nie raakloop nie. Het wel Christo, Cedrick en Kobus te siene gekry, maar daar was seker amper honnert karre daar. Baie suksesvolle dag vir die Nissan club ne?

Partykeer is dit amper onmoontlik om ouens te kry om te kwoteer. Ek hoop maar dit beteken dit gaan so goed met sy besigheid dat hy nie ekstra werk nodig het nie?
Peter
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Stefan
Moderator
Posts: 1692
Joined: 28 Apr 2009 08:43
Full Name: Stefan de Villiers
Nickname: Stefan
Home Town: Bothasig, Cape Town
Current 4x4: 2002 3.0 GL Patrol
Home Language: Afrikaans
Location: Cape Town
Has thanked: 175 times
Been thanked: 49 times
Contact:

Re: Bash Plates

Post by Stefan »

order sent!
Wilfred Moore
Senior Member
Senior Member
Posts: 164
Joined: 21 Dec 2009 08:54
Full Name: Wilfred Moore
Nickname: Wilfred
Home Town: Centurion
Current 4x4: 2010 Nissan Patrol 4800 GRX
Home Language: Afrikaans
Has thanked: 2 times
Been thanked: 4 times

Re: Bash Plates

Post by Wilfred Moore »

Peter, deposito paid and sent.

Thanks for your trouble !!

Wilfred
DaveH
Junior Member
Junior Member
Posts: 12
Joined: 15 May 2010 17:57
Full Name: Dave Henson
Nickname: Dave
Home Town: Midrand
Current 4x4: 2007 Nissan Patrol 4.8grx
Home Language: English

Re: Bash Plates

Post by DaveH »

Peter

Thanks for the trouble. I have ordered 1 galvanised bash plate and 1 transfer case cover for a 2007 4.8grx Patrol and sent 50% deposit to you.
Post Reply

Return to “18. Vehicle Accessories”

Who is online

Users browsing this forum: No registered users and 1 guest