Patrol Pics



My GU 4.2 Turbo Diesel

Showcase your baby

Re: My GU 4.2 Turbo Diesel

Postby Michael » 14 Mar 2017 10:42

Ok so an update on my Patrol.....have not done anything to it for a while.

With the Dune trip just around the corner and with loads of drag racing waiting I did not want to take a chance with my already very worn clutch and decided to change it over the weekend. I have already bought a new kit from Nissan a long time ago and it is now finally installed.

I bought the car with a pirate kit in and it was already worn back then. I have now done more than 40,000km after that so it is overdue.

So quite a big job if you don't have a lift and/or a gearbox jack. So I decided to rather take out the engine. Started at 8:00 AM and had the engine back on its mountings at 14:00 same day. Took another 4 hours or so to get the wiring and piping sorted.

Some interesting things that have happened since the clutch kit was changed.
1. The clutch is about two times as soft to push in (this was expected and is common with a new clutch)
2. I used to have this rattling noise coming from the gearbox when the car is in neutral and clutch not depressed which many TD42 owners have and was said to be the gearbox gears making that noise. It is not totally gone after the clutch replacement, so I will point this to the clutch plate instead.

I did not take many pictures as I was really rushing to get the job done, but took one just as I had the engine back in its position.
Attachments
Patrol Engine Install.jpeg
Patrol Engine Install.jpeg (193.76 KiB) Viewed 652 times
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Michael
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2397
Joined: 05 Mar 2014 14:39
Location: Centurion, PTA
Has thanked: 134 times
Been thanked: 215 times
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby iandvl » 14 Mar 2017 10:45

Respect Michael. :salute: :salute:

I guess you've had that motor out a few times before. I'd be too frightened of screwing stuff up to do a job like that on my own... :rolling: :rolling:
User avatar
iandvl
Patrolman
Patrolman
 
Posts: 967
Joined: 12 Jan 2015 13:26
Has thanked: 89 times
Been thanked: 101 times
Full Name: Ian de Villiers
Nickname: Ian
Home Town: Brits
Current 4x4: Nissan Patrol 4.5 GRX
Nissan Hardbody 2.4 4x4
Home Language: English

Re: My GU 4.2 Turbo Diesel

Postby Michael » 14 Mar 2017 10:56

I Think it gets easier after the 5th engine install :lol:

I see now I have never posted new pics of how my Patrol looks with the new rims and tyres I installed...... ish

So here are two nice ones Peter Conann took at Hennops the other day
Attachments
Michael Patrol-2560.jpg
Michael Patrol-2560.jpg (840.24 KiB) Viewed 646 times
Michael Patrol2-2560.jpg
Michael Patrol2-2560.jpg (707.76 KiB) Viewed 646 times
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Michael
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2397
Joined: 05 Mar 2014 14:39
Location: Centurion, PTA
Has thanked: 134 times
Been thanked: 215 times
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby hugejp » 14 Mar 2017 18:07

So hoe lyk die workshop nou???

Ons het dalk werk om te begin...
:biggrin:
----------------------------------------------------------------------

You CAN with a NISSAN!

Jy KAN met 'n DATSUN!
User avatar
hugejp
Patrolman
Patrolman
 
Posts: 826
Joined: 21 Oct 2014 21:01
Has thanked: 49 times
Been thanked: 49 times
Full Name: JP Viviers
Nickname: Oupoot
Home Town: JHB
Current 4x4: 2004 Patrol 4.8 GRX
2003 Patrol 4.2 tdi
1999 Patrol 4.5 GRX
Home Language: Half & Half

Re: My GU 4.2 Turbo Diesel

Postby Michael » 14 Mar 2017 19:39

Ons sal praat as die duine trip verby is......ek het plek :thumbup:
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Michael
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2397
Joined: 05 Mar 2014 14:39
Location: Centurion, PTA
Has thanked: 134 times
Been thanked: 215 times
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby Wilkie » 14 Mar 2017 21:20

MMMMMmmmm..Michael dit lyk my ek en jy het die selfde werk gedoen oor die naweek...
ook 4.8 motor getrek ( met seer hart) en 4.5 ingesit en dit vir die Duine trip..
moet ook se dat my koppelaar is super sag na die nuwe een ge-installeer was.. :biggrin: :biggrin:
Wilkie
Patrolman 1000+
Patrolman 1000+
 
Posts: 1295
Joined: 24 Feb 2014 15:33
Has thanked: 54 times
Been thanked: 77 times
Full Name: Errol Wilken
Nickname: Wilkie
Home Town: Pretoria
Current 4x4: 1999 4.5 GRX Nissan Patrol
Rebuilding Nissan safari ldv
2004 BMW 3.0D X5
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby Michael » 24 Aug 2017 16:58

Right so time to update my thread here as quite a bit has happened recently.

Things have gone south when i was traveling north for the annual river trip. Just when I reached Bela Bela I noticed a slight misfire and saw quite a bit of blow by when I opened the oil filler cap. I knew there were an internal failure and suspected a cracked piston. I turned back, took the head off and found the following.

No. 6 Piston had a massive crack in and this was the cause of the misfire obviously, but it made no sense as I built the engine only 50,000km ago and all temps were kept well within the safety margins. I took out the engine and stripped everything as I decided against just replacing the pistons and doing it properly.

Upon closer inspection and going back to the original purchase of my parts I found that the "turbo" pistons I was supplied with was actually NOT turbo pistons :surprised:
This was was very upsetting as anyone can imagine as this should never have happened.

Some pics of No. 6 Piston from a couple of angles. It actually almost cracked right through the middle and it could have ended easily with a conrod through the block if I continued driving like that.
piston5-2200.jpg
piston5-2200.jpg (236.58 KiB) Viewed 107 times

piston4-2200.jpg
piston4-2200.jpg (142.3 KiB) Viewed 107 times

piston3-2200.jpg
piston3-2200.jpg (171.14 KiB) Viewed 107 times

piston2-2200.jpg
piston2-2200.jpg (123.98 KiB) Viewed 107 times

piston1-2200.jpg
piston1-2200.jpg (148.7 KiB) Viewed 107 times


Now below is a photo of the Non turbo pistons vs the turbo piston i am planning to install in my engine this time round.
This is the same spec piston found in the UD40 trucks and is the same pistons the Ausies use to build their 250kw 900Nm engines of madness so they should be able to handle my hopefully 130kw and 450Nm on the rear wheels I am after with ease.
piston comparison-2200.jpg
piston comparison-2200.jpg (198.76 KiB) Viewed 107 times
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Michael
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2397
Joined: 05 Mar 2014 14:39
Location: Centurion, PTA
Has thanked: 134 times
Been thanked: 215 times
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby Michael » 24 Aug 2017 17:12

Now I am not too sad about the whole episode, even if it was just a very expensive exercise to prove that you cannot run 1 bar+ boost on N/A pistons so that someone ellse makes the correct decisions when building an engine I guess it has a purpose. Its a blessing that ONLY the pistons were cracked and nothing ells was damaged
From the start I built my engine to do some testing and experiments as we are not even close to what the Ausies know about these engines, but there was only one way of doing it and thats try and implement what they have done and picking up their bread crumbs left of the forums.

So some new stuff planned for my new engine build:
1. Sending in my crank, front pully, nut, flywheel, pressure plate, clutch disc, conrods and pistons for some balancing :biggrin:
2. I also purchased some Nissan TD42T pre-combustion chambers and did some porting on them. (see pics below)
3. Planning on ceramic coating the piston crowns as well as the precomps inside and outside if my budget allows it.
4. New top mount turbo manifold
5. new 63mm polished mandrel bend boost pipes
6. stainless air box
7. will be running 1.2 bar boost hopefully if I can squeeze a bit more fuel out of the pump
8. new TD42T piston oil squirters to make sure as much possible oil reach the piston crown. (see below pics)
oil squirters-2200.jpg
oil squirters-2200.jpg (102.3 KiB) Viewed 104 times

precomps-2200.jpg
precomps-2200.jpg (289.05 KiB) Viewed 104 times
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Michael
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2397
Joined: 05 Mar 2014 14:39
Location: Centurion, PTA
Has thanked: 134 times
Been thanked: 215 times
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans

Re: My GU 4.2 Turbo Diesel

Postby Anthony Forgey » 24 Aug 2017 17:17

It's amazing that the pistons lasted as long as they did with 1 bar boost. Just imagine the possibilities with the new (better) turbo pistons.

I hope your last few bits arrive soon so that the vehicle can return to its natural habitat
'98 Patrol 4.2D

Intelligence is measured in smarts, stature is measured in hearts
Anthony Forgey
Senior Member
Senior Member
 
Posts: 183
Joined: 07 Apr 2016 09:46
Has thanked: 15 times
Been thanked: 19 times
Full Name: Anthony Forgey
Nickname: Anthony
Home Town: Randburg
Current 4x4: 98 4.2D
Home Language: English

Re: My GU 4.2 Turbo Diesel

Postby iandvl » 24 Aug 2017 18:11

My vehicle's natural habitat is the gas station. Its secondary habitat is where it should be, and the third is tar.... It is petrol though, which means it is thirsty... :rolling:

On a serious note: wow, Michael. Not being a diesel 'kenner' I am a little clueless about turbos and boost and stuff. But the comparison photo of the pistons ? That is just incredible.... :|

Edit - PS: Hope all is sorted very soon.
User avatar
iandvl
Patrolman
Patrolman
 
Posts: 967
Joined: 12 Jan 2015 13:26
Has thanked: 89 times
Been thanked: 101 times
Full Name: Ian de Villiers
Nickname: Ian
Home Town: Brits
Current 4x4: Nissan Patrol 4.5 GRX
Nissan Hardbody 2.4 4x4
Home Language: English

PreviousNext

Return to 08. Your Patrol

Who is online

Users browsing this forum: No registered users and 0 guests