Camping trailer

Please tell us about your DIY projects, tips and tricks
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

Martin, in enige so 'n projek is daa4 hierdie frustrerende tydperke waar dit voel asof mens niks vordering maak nie.

Ek dink ek nader nou die einde van een van daai, en hop3lik teen die einde van die naweek sal daar sigbare vordering wees om met julle te deel.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

So, what material for the body? Sheet steel is relatively easy to work with, but also fairly heavy. It is relatively difficult to get odd shapes out of unless you spend a lot of money on forming tools, although that's not a big issue here.

Aluminium is much lighter, but even more difficult to work with, and relatively expensive too.

I also considered Alcobond. This fairly new material is a composite made of two thin sheets of Aluminium sandwiching a sheet of LDPE. Light, relatively sturdy and not insanely expensive, it is unfortunately impossible to form except in very long radii. So it can't be bent to form an edge. And it's not terribly strong either.

As a long-time Lotus fan, I have a soft spot for glass fibre. But as a lazy bastard, you won't really see me building moulds too often. A few years (actually decades) ago, I built a light game-viewing vehicle. During the process I "developed" a simple method of working with glass fibre: build a frame of wire mesh and lay fibreglass on both sides. This proved to be simple and easy and incredibly strong.

This time, I went a step further. I found a company in the cape who make flat glass fibre sheetin widths up to 2.5 m and thickness of 2 or 3mm. One side is gel-coated. This is generally used for making semi-trailer bodies.

My idea was to rivet it together using aluminium angle sections at the corners, and then add extra layers of mat and resin on the inside. I also used some steel sections as formwork in specific areas.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

However, when the sheet arrived (a piece 2.5m x 5.9m long) rolled into a coil af 400mm in diameter, I started worrying that it was not going to be sturdy enough.

I started by cutting it out using a jigsaw, and that's when the big itch started. This stuff is quite abrasive, and chewed a jigsaw blade up in no time.
Pieces of body ready cut
Pieces of body ready cut
TrailerBuild-55.jpg (200.88 KiB) Viewed 2926 times
I started upside down, as the top would eventually be flat.
the top with corners glued and riveteed on.
the top with corners glued and riveteed on.
TrailerBuild-56.jpg (214.31 KiB) Viewed 2926 times
Formwork added
Formwork added
TrailerBuild-59.jpg (211.42 KiB) Viewed 2926 times
I started with narrow strips in the corners:
Corners
Corners
TrailerBuild-62.jpg (227.98 KiB) Viewed 2926 times
The formwork was cut to try and get a good bond with the glass fibre.
TrailerBuild-61.jpg
TrailerBuild-61.jpg (249.79 KiB) Viewed 2926 times
Formwork edge detail
Formwork edge detail
TrailerBuild-63.jpg (220.42 KiB) Viewed 2926 times
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

I then added a wider strip in each corner, followed by an extra layer on most sections of what would eventually be the roof and bulkheads.

With this done, I then added the panels that would becomne the floors of the various boxes. Gladly, during this process the box has become really sturdy.

To do the corners and panels of these sections however, I needed to turn it over, as fibreglass does not stick to overhead surfaces. So I just put it on the trailer...
TrailerBuild-64.jpg
TrailerBuild-64.jpg (249.24 KiB) Viewed 2926 times
TrailerBuild-65.jpg
TrailerBuild-65.jpg (178.55 KiB) Viewed 2926 times
TrailerBuild-66.jpg
TrailerBuild-66.jpg (213.14 KiB) Viewed 2926 times
Luckily, pretty much everything fits and the mounting bolt holes all line up. Unfortunately, due to bad planning I promptly ran out of resin...

Note that the "furry stuff" is a layer of heavy cling wrap applied to the gel coated surface to protect it. I have been peeling it back from the edges before assembly.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

Single glass fibre work had perforce stopped for the weekend, I started installing the kitchen unit.
This needs to slide out the side by about a metre, but since drawer sliders that long are insanely expensive (a 600mm slider costs around R250 from a cabinet-fixture-supplier, an 800mm unit R350 but the cheapest 1m slider I could find was R1500), therefore I designed two sub-frames. On the one side, I welded a 10mm round bar to the bottom of the drawer frame, and turned up grooved rollers. These are fitted to ball bearings, and bare ball bearings are mounted above them.
Master side
Master side
TrailerBuild-69.jpg (183.92 KiB) Viewed 2925 times
On the other side I just used ball bearings both top and bottom.
Both sides
Both sides
TrailerBuild-70.jpg (205.46 KiB) Viewed 2925 times
Kitchen extended
Kitchen extended
TrailerBuild-67.jpg (249.01 KiB) Viewed 2925 times
TrailerBuild-68.jpg
TrailerBuild-68.jpg (177.53 KiB) Viewed 2925 times
The sunken-in side will have a two-burner stove mounted on top, the rest is a working surface. Under the stove there will be two drawers slideing out at right angles to the main slider. The first one is quite shallow and will be used for plates, cutlery and spices, and the one below it for mugs, glasses and a couple of wine glasses for the ladies.
A third drawer fits under the working surface, sliding out in the same direction as the kitchen slider.

These have been made and fitted, but removed again for painting.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

These light guards have a double purpose:
Light guards
Light guards
TrailerBuild-73.jpg (225.22 KiB) Viewed 2925 times
A table clips into grooves at the bottom:
TrailerBuild-71.jpg
TrailerBuild-71.jpg (210.85 KiB) Viewed 2925 times
This has a hole cut in it to accept a wash basin.
Hook detail
Hook detail
TrailerBuild-72.jpg (238.6 KiB) Viewed 2925 times
When not fitted, the table will live in a large drawer ander the kitchen cabinet.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Dustin
Senior Member
Senior Member
Posts: 428
Joined: 14 Sep 2009 12:14
Full Name: Dustin Roberts
Nickname: Dustin
Home Town: Port Elizabeth
Current 4x4: Patrol-less :-(
Home Language: English
Location: Port Elizabeth
Has thanked: 42 times
Been thanked: 52 times

Re: Camping trailer

Post by Dustin »

Nice :thumbup:
Almost there Peter
a.k.a. Datsun Dustin

View my Patrol's story here : http://patrol4x4.co.za/viewtopic.php?f=43&t=6478

No hill too steep, no donga too deep !
GO PATROL !!!
petrol
Senior Member
Senior Member
Posts: 172
Joined: 26 Nov 2012 19:14
Full Name: Martin Koorts
Nickname: Martin
Home Town: Centurion
Current 4x4: 2000 Patrol 4.5 GRX
Home Language: Afrikaans
Has thanked: 5 times
Been thanked: 14 times

Re: Camping trailer

Post by petrol »

Dankie Peter
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Camping trailer

Post by ricster »

looking good bud!!!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: Camping trailer

Post by Peter Connan »

Thanks Dustin, Martin and Cedric.
Mag ons ons kenniskry met lekkerkry aanhoukry.
Post Reply

Return to “21. DIY Projects”

Who is online

Users browsing this forum: No registered users and 4 guests