Ok
I het gedink om n pyp met so 5mm wand dinkte en so 400mm lank te kry wat oor die panhard pas dan word daar linksom en regsom skroefdraad aan die buite kant van die panhard (wat in die middel deur gesny is) gesny en dan ook aan die binnekant van die pyp.
Wat dink julle van so n idee?
Panhard rod for 2" lift?
-
- Full Member
- Posts: 40
- Joined: 04 Aug 2011 19:32
- Full Name: Brett Bignoux
- Nickname: Brett Bignoux
- Home Town: Heatonville
- Current 4x4: Datsun Safari Pick Up 1982 , Nissan Ruff , Yamaha Wolverine . Datsun Safari Wagon 1982
- Home Language: English
- Has thanked: 2 times
- Been thanked: 9 times
Re: Panhard rod for 2" lift?
GOOD DAY LADYS AND GENTS ! (yes we do have a few ladys for those of you that have not rememberd ! ) Your panhard rod , if it is solid , then why not cut it , thread the outside of one end , then machiene up a thick walled sleeve with thread in one end . Then press and weld the sleeve onto the unthreaded section of panhard rod . Add a pinch bolt to the sleeve to stop the thread from rattling and twisting . To adjust , remove one bush pin bolt , and turn one end 180 degrees at a time to get the desired length . The only problem is finding a good turner to machiene up the parts and do the press work and welding . This is perhaps a simpler and cheaper idea than a left and right thread as left hand threads are very expensive to cut for "one off jobs" . (you can't get one , two , or five cents any more , so that will have to be my ten cents worth !) CHEERS FOR NOW .
Can we get rid of STUPID DRIVERS before they kill us ?
-
- Senior Member
- Posts: 172
- Joined: 26 Nov 2012 19:14
- Full Name: Martin Koorts
- Nickname: Martin
- Home Town: Centurion
- Current 4x4: 2000 Patrol 4.5 GRX
- Home Language: Afrikaans
- Has thanked: 5 times
- Been thanked: 14 times
Re: Panhard rod for 2" lift?
Hello almal
Wat dink julle van dropboxes vir die panhards?
Dan hoef die panhard rod nie verleng te word nie en omdat hy dan weer hoerisontaal is gaan daar ook baie minder links, regs beweging van die aste wees wanneer oor hobbels gery word.
Die dropbox sal net n stut arm moet kry wat in dieselde rigting as die panhard loop maar net chassis toe. Die stut arm kan dalk verstelbare rod ends kry, vir fyn instel.
Wat dink julle van dropboxes vir die panhards?
Dan hoef die panhard rod nie verleng te word nie en omdat hy dan weer hoerisontaal is gaan daar ook baie minder links, regs beweging van die aste wees wanneer oor hobbels gery word.
Die dropbox sal net n stut arm moet kry wat in dieselde rigting as die panhard loop maar net chassis toe. Die stut arm kan dalk verstelbare rod ends kry, vir fyn instel.
- Peter Connan
- Moderator
- Posts: 6016
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Panhard rod for 2" lift?
Ek dink dit is redelikke algemene praktyk op die Jeeps, en ek dink dit het baie voordele.
Ek weet net nie hoekom niemand ander dit op Patrols doen nie, MAW of dit dalk iewers stamp of iets?
Ek weet net nie hoekom niemand ander dit op Patrols doen nie, MAW of dit dalk iewers stamp of iets?
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Grant
- Patrolman 1000+
- Posts: 1269
- Joined: 29 Apr 2009 14:52
- Full Name: Francis
- Nickname: Grant
- Home Town: Rosendal
- Current 4x4: 2020 70 Series V8 LC
Hilux 2,4 4x4 SC Dakar - Home Language: English
- Location: Eastern Free State
- Has thanked: 3 times
- Been thanked: 25 times
Re: Panhard rod for 2" lift?
Dirks Patrol, has drop boxes and extended Panhard rods so I am sure he can be bought to donate for a weekend. Note that the drop box is specific to the lift you have installed. 2,4 or 6 inch.
V8 Power
You can't expect to be old and wise
if you were never young and crazy
You can't expect to be old and wise
if you were never young and crazy
Who is online
Users browsing this forum: No registered users and 24 guests