Patrol Pics



Front anti-sway bar QD's

Bullbars, roof racks, suspensions and other accessories relating to vehicle performance

Front anti-sway bar QD's

Postby Peter Connan » 07 Nov 2016 08:33

I have on a number of occassions stated that i believe that removing the sway bars makes no difference to the rollover angle or actual safety of a Patrol unless it is lifted or running heavy loads topsides.

However, there is no doubt that less body roll contributes to a feeling of safety.

I have thus designed a quick-disconnect setup for the front anti-sway bar (i think this limits flex and has more effect than the rear). it will fit Y60 and Y61 models with coil spring front suspensions (thus not the Y60 pickup).

It consists of new chassis brackets and new connecting links (including fhe ball joints).

Cost is R2500.00 and the prototypes can be seen on Alex Roux's car.

IMG-20161105-WA0006.jpg
IMG-20161105-WA0006.jpg (147.44 KiB) Viewed 1331 times


IMG-20161105-WA0007.jpg
IMG-20161105-WA0007.jpg (130.61 KiB) Viewed 1331 times
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 4890
Joined: 10 Sep 2010 07:21
Location: Kempton Park
Has thanked: 182 times
Been thanked: 249 times
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.2SGL
Home Language: Afrikaans

Re: Front anti-sway bar QD's

Postby David M » 07 Nov 2016 08:55

Put me down for a set. Have always been too scared to permanently disconnect especially as I tow a boat and/or with roofrack on.

3 questions;

1. Do you have a set available that I can fit before the weekend?
2. It is obvious as to how it disconnects at the top but how does it disconnect at the bottom or do you just cable tie it up.
3. Are you going to be making them up for the rear of the Y61 at a later stage? I don't think the Y60 has a swaybar at the back.
There are still places out there!!!! - Daniel Goz - The "Tapam" movie
User avatar
David M
Patrolman
Patrolman
 
Posts: 731
Joined: 12 Nov 2013 15:13
Location: Midrand
Has thanked: 16 times
Been thanked: 62 times
Full Name: David Marais
Nickname: David Marais
Home Town: Midrand
Current 4x4: 1998 4.5 GL Patrol
2006 4.2 Td Bakkie (SWAMBO's) - The "Firetruck"
Home Language: English

Re: Front anti-sway bar QD's

Postby ricster » 07 Nov 2016 09:02

Very nice Peter !!! I like it a lot. Have you got for the rear too???
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
 
Posts: 5359
Joined: 13 Jan 2010 11:16
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 165 times
Been thanked: 199 times
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English

Re: Front anti-sway bar QD's

Postby offroadbiker » 07 Nov 2016 09:07

What will be the effect on my vehicle that already has some reasonable flex and the fact that it has such a considerable lift? TX
Dirk
1996 Nissan Patrol 4.2 ST
User avatar
offroadbiker
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 2430
Joined: 25 Jul 2012 08:36
Location: Krugersdorp
Has thanked: 76 times
Been thanked: 79 times
Full Name: Dirk de Clerk
Nickname: ORB
Home Town: Krugersdorp
Current 4x4: Patrol GQ 4.2 ST
Home Language: Afrikaans/English

Re: Front anti-sway bar QD's

Postby SJC » 07 Nov 2016 09:09

Nice.
Altwee my Patrols se voorste sway bars lê in die motorhuis op die oomblik.. (Die 4.5 se agterste een is los gemaak aangesien die een bracket gebreek het).
Indien daar so iets vir die agterste een is sal ek dit oorweeg. Beplan jy miskien een vir agterste sway bars?
User avatar
SJC
Patrolman 1000+
Patrolman 1000+
 
Posts: 2497
Joined: 23 Nov 2014 14:20
Has thanked: 73 times
Been thanked: 103 times
Full Name: SJC
Nickname: Fanus
Home Town: Lowveld
Current 4x4: 4.2TD Pickup & 4500 GRX
Home Language: Afrikaans/English

Re: Front anti-sway bar QD's

Postby Peter Connan » 07 Nov 2016 09:31

Eish, caught with my pants down again.

David, sorry, i only made the one set.

Only the top end disconnects, and you have to tie it up. I am thinking about a bracket of some sort to make cable ties unnecessary, but not quite there yet.

With regard to the rear end, either extending the links or fitting the extension brackets can get a lot of flex without having to disconnect, and prevents the breakages.

Actually the Old Man Emu catalog expressly statez that these must be fitted to prevent breakages.

Look at the pictures of Yamiax's car in the "show your flex" thread. He had extension brackets fitted.

Do yoh guys want to give me some indication of how many front sets i should make up?
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 4890
Joined: 10 Sep 2010 07:21
Location: Kempton Park
Has thanked: 182 times
Been thanked: 249 times
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.2SGL
Home Language: Afrikaans

Re: Front anti-sway bar QD's

Postby David M » 07 Nov 2016 09:52

Thanks Piet.

Definetly a set of front for me so lets's start the list.

I have the OME extended brackets at the back but disconnected there is even more available - I have checked - Future project?
There are still places out there!!!! - Daniel Goz - The "Tapam" movie
User avatar
David M
Patrolman
Patrolman
 
Posts: 731
Joined: 12 Nov 2013 15:13
Location: Midrand
Has thanked: 16 times
Been thanked: 62 times
Full Name: David Marais
Nickname: David Marais
Home Town: Midrand
Current 4x4: 1998 4.5 GL Patrol
2006 4.2 Td Bakkie (SWAMBO's) - The "Firetruck"
Home Language: English

Re: Front anti-sway bar QD's

Postby David M » 07 Nov 2016 09:54

Font anti-sway bar QD's round 1 - Just edit your name in

1. David M
2.
3.
4.
5.
There are still places out there!!!! - Daniel Goz - The "Tapam" movie
User avatar
David M
Patrolman
Patrolman
 
Posts: 731
Joined: 12 Nov 2013 15:13
Location: Midrand
Has thanked: 16 times
Been thanked: 62 times
Full Name: David Marais
Nickname: David Marais
Home Town: Midrand
Current 4x4: 1998 4.5 GL Patrol
2006 4.2 Td Bakkie (SWAMBO's) - The "Firetruck"
Home Language: English

Re: Front anti-sway bar QD's

Postby Peter Connan » 07 Nov 2016 11:04

David M wrote:Thanks Piet.

Definetly a set of front for me so lets's start the list.

I have the OME extended brackets at the back but disconnected there is even more available - I have checked - Future project?


Ok.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Patrolman 1000+
Patrolman 1000+
 
Posts: 4890
Joined: 10 Sep 2010 07:21
Location: Kempton Park
Has thanked: 182 times
Been thanked: 249 times
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.2SGL
Home Language: Afrikaans

Re: Front anti-sway bar QD's

Postby Alex Roux » 07 Nov 2016 11:09

David M wrote:Put me down for a set. Have always been too scared to permanently disconnect especially as I tow a boat and/or with roofrack on.

3 questions;

1. Do you have a set available that I can fit before the weekend?
2. It is obvious as to how it disconnects at the top but how does it disconnect at the bottom or do you just cable tie it up.
3. Are you going to be making them up for the rear of the Y61 at a later stage? I don't think the Y60 has a swaybar at the back.



Hi David

You will notice that there is a re-usable cable tie in the picture above, that I will intend to use when disconnecting at the top.
I have a 2" susp lift and 2" body lift, plus a steel roof rack.
This caused considerable body roll, which I just did not like. As okay as Peter said it should be.
Putting this on made a helluva difference in my car's handling.

With regard to the rear:
I do not have the rear back on at the moment.
I snapped it off some years back at Berakka. I did not notice the handling impact at the time though.
So the experience of body roll around a corner is definitely a lot less or unoticable for the rear stabiliser.
I am still waiting for a new old one from Dawid. For that I intend to only get the connecting rods extended to accommodate the lift, rather than the disconnecting functionality.
Witblits
User avatar
Alex Roux
Patrolman 1000+
Patrolman 1000+
 
Posts: 2371
Joined: 11 Jul 2011 10:54
Has thanked: 37 times
Been thanked: 106 times
Full Name: Alexander Roux
Nickname: Witblits
Home Town: Johannesburg
Current 4x4: Patrol 3Tdi (2004) - geLexus (2011)
Home Language: Afrikaans

Next

Return to 18. Vehicle Accessories

Who is online

Users browsing this forum: No registered users and 0 guests