Camping trailer

Please tell us about your DIY projects, tips and tricks
Post Reply
Daniel
Full Member
Full Member
Posts: 46
Joined: 13 Jan 2010 12:03
Full Name: Daniel Nelson
Nickname: Dan
Home Town: Cape st Francis
Current 4x4: 2007 Patrol 3.0 GL
Home Language: ENGLISH
Has thanked: 2 times
Been thanked: 10 times

Re: Camping trailer

Post by Daniel »

Only one puncture so far on all my travels due to a thorn which I was able to put a plug in without removing the wheel. I run Bridgestone ATs on my Patrol and HTs on the trailer.
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Camping trailer

Post by Peter Connan »

Daniel, I actually meant punctures of the air springs, which in your installation seem quite unprotected, but I guess that answers the question eloquently thank you.

Well, the casting for the coupler arrived on Friday afternoon.
By yesterday morning the machining was complete and the trailer was trundling around in the park in front of my house. This park is almost a pedestrian thoroughfare, and lots of people ride quad bikes, scramblers and 4x4's on it. It seems to get a lot of use as a driver training venue over the weekends as well. The result is that there are some reasonably good ruts in places, which were taken cross-wise at reasonable speed.

So far, so good, although I have identified a couple of small issues. The rub is of course that, despite filling the water tanks, the trailer is still very light.

Tomorrow evening it is being delivered to a specialist hose supplier for brake pipes.
Mag ons ons kenniskry met lekkerkry aanhoukry.
Daniel
Full Member
Full Member
Posts: 46
Joined: 13 Jan 2010 12:03
Full Name: Daniel Nelson
Nickname: Dan
Home Town: Cape st Francis
Current 4x4: 2007 Patrol 3.0 GL
Home Language: ENGLISH
Has thanked: 2 times
Been thanked: 10 times

Re: Camping trailer

Post by Daniel »

You will be amazed how quickly the trailer weight increases Peter as you add the box and all the bits on top.
Out of interest the photo of my trailer suspension is taken from the rear ... You will notice that my 150 liter water tank which sits inside the front of the chassis completely protects the air springs from the front!! My main concern there was possible stone damage coming off the rear wheels of the Patrol!!
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Camping trailer

Post by Peter Connan »

Daniel you are quite correct. The empty box (which is quite small by most standards and will be made from a light-weight composite material) will weigh about as much as the chassis.

And that's not even considering all the doors, hinges, catches etc.

Which is why, even keeping it as light as possible, i will still need brakes.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Camping trailer

Post by Peter Connan »

At least if all else fails, I can now water the garden.
TrailerBuild-47.jpg
TrailerBuild-47.jpg (287.23 KiB) Viewed 3484 times
This gives some idea of the built-in pump's delivery...

Unfortunately, it only lasts about 17 minutes.

Hopefully by tomorrow afternoon it should have working brakes. Any ideas on how to test them?
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Camping trailer

Post by ricster »

Yeah.... put your foot down on the brake pedal..... :rolling: :rolling: :rolling: :rolling: ..... just kidding bud .... it's looking good though, well done so far !!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
Chris Skinner
Patrolman
Patrolman
Posts: 852
Joined: 26 Nov 2009 12:58
Full Name: Chris Skinner
Nickname: Chris
Home Town: Centurion
Current 4x4: Nissan Patrol 4,8 GRX 2005
Home Language: English
Has thanked: 10 times
Been thanked: 53 times

Re: Camping trailer

Post by Chris Skinner »

Hey Peter - I been following this with interest... a very nice project and aI think your design, as usual, is well though through and will be a great success.
I see you plan to have the chassis galvanized - any idea where to do this and the cost. I suppose you remove all bolted on items before galvanizing. Are you just using a spray can for the temp undercoat at the moment?
I test my compression type brakes on my boat trailer either by braking hard and feeling the extra dip in the back of the vehicle when they bite, as this is not evident when they are not braking. You can also brake from a certain speed with and without the brakes engaged and then see the difference in braking distance. I find them very effective even on 3 ton set-up on tow.
User avatar
Peter Connan
Moderator
Posts: 6011
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1067 times
Been thanked: 985 times

Re: Camping trailer

Post by Peter Connan »

Thanks Chris.

I have no idea of where/who yet. I will start asking at Galvaglow in Krugersdorp as they have been doing all my galvanizing for several years now.

Everything will have to be removed first yes.

One idea i found on the net is just to check the temperatures of the brake drums after a longish drive, as i doubt i will be able to feel any difference with this little trailer.

However my real issue is to try and determine if i have my leverage ratios correct. Ie wether the brakes are as effective as possible, working hard when they have to without being too sensitive so that they tend to lock up each time you touch the brakes...

Ie the type of thing the coupler manufacturers need to worry about, and not the user. I am currently not even sure how much it matters as long as they actually provide enough braking, the minimum should to some extent be self-regulating?
Mag ons ons kenniskry met lekkerkry aanhoukry.
IanT
Patrolman 1000+
Patrolman 1000+
Posts: 1234
Joined: 17 May 2013 10:43
Full Name: Ian Temperley
Nickname: IanT (aka) "The Joker"
Home Town: JHB
Current 4x4: 1995 GQ 4.2 Petrol (Turbo Charged) (Hell Boy)
2008 4.8 GRX Umkombe
Home Language: English
Been thanked: 92 times

Re: Camping trailer

Post by IanT »

Hi Peter, my be a dumb answer but why not just take it to a test station and let them test it on a rolling road like they do for a RWC
User avatar
Grant
Patrolman 1000+
Patrolman 1000+
Posts: 1269
Joined: 29 Apr 2009 14:52
Full Name: Francis
Nickname: Grant
Home Town: Rosendal
Current 4x4: 2020 70 Series V8 LC
Hilux 2,4 4x4 SC Dakar
Home Language: English
Location: Eastern Free State
Has thanked: 3 times
Been thanked: 25 times

Re: Camping trailer

Post by Grant »

Hi Peter,


This is why Conqurorer on the Companion and Commander have gone the independent route.
Attachments
3-Hot-dip-galvanized-ladder-chassis-1.jpg
3-Hot-dip-galvanized-ladder-chassis-1.jpg (295.87 KiB) Viewed 3405 times
V8 Power

You can't expect to be old and wise
if you were never young and crazy
Post Reply

Return to “21. DIY Projects”

Who is online

Users browsing this forum: No registered users and 2 guests