Coolant Loss Sensor for 4.8
-
- Patrolman
- Posts: 902
- Joined: 19 Jun 2013 15:16
- Full Name: Clem Daniel
- Nickname: Clem
- Home Town: Johannesburg
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 35 times
- Been thanked: 37 times
Coolant Loss Sensor for 4.8
Guys, what are the options for the 4.8? Built my own for my 3.9 in the Landy but getting too lazy now and don't see a need for a whole Madman system on the 4.8(?). Was thinking maybe of the Australian engine saver? Anyone know it or used it?
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
-
- Patrolman
- Posts: 902
- Joined: 19 Jun 2013 15:16
- Full Name: Clem Daniel
- Nickname: Clem
- Home Town: Johannesburg
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 35 times
- Been thanked: 37 times
Re: Coolant Loss Sensor for 4.8
Hi Tinus, yes. I had a self- testing alarm in my Disco. Set off. A buzzer as soon as the header tank level ( highest pount in the Disco system) dropped. Something similar wanted here.Tinus lotz wrote:Do u just want to monitor water level?
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
-
- Patrolman
- Posts: 902
- Joined: 19 Jun 2013 15:16
- Full Name: Clem Daniel
- Nickname: Clem
- Home Town: Johannesburg
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 35 times
- Been thanked: 37 times
Re: Coolant Loss Sensor for 4.8
Tinus lotz wrote:Good idea like the sensor in a golf bottle
Something like that. The later Range Rover had a float sensor built into the header tank cap. The tread and cap diameter was the same as on my Discovery. So I used that, a resistor and a very sensitive relay. Under the dash I inserted a buzzer and on the dash I put a simple toggle switch. The relay is a normally closed one. When you flip the toggle switch to the "off" position (the labels being reversed so that in fact you were completing the circuit) it will supply only just enough power to open the relay and hold it there when you switch it back to the "on" position, switching off the buzzer. The nett effect is that if either the circuit is damaged in some way or the water levels drops, the circuit is broken, the relay closes and the buzzer goes. When you turn the ignition on, the buzzer goes off so you then have to flip the toggle switch off and then on again to silence it, establishing on each occasion that the system is working properly. Just about completely fail safe, the electrickery also being in a sealed water and dust proof housing. The whole is quite sensitive and ought to be temporarily switched when navigating very steep inlines or declines off road, to avoid false alarms. I have never had a cooling system failure but it gave me much peace of mind indeed. It is something that is, in my view, essential to all engines. A petrol engine may run a few minutes on the open road without water before it seizes up. With a turbo-diesel you normally have seconds to severe engine damage, which is why with the latter an automatic shut down system may be advisable, even at the cost of turbo bearing oil starvation. The big worry with automatic shutdowns is the possible danger it may create in certain situations - but perhaps that is all moot if the engine will seize anyway.
-
- Patrolman
- Posts: 902
- Joined: 19 Jun 2013 15:16
- Full Name: Clem Daniel
- Nickname: Clem
- Home Town: Johannesburg
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 35 times
- Been thanked: 37 times
Re: Coolant Loss Sensor for 4.8
As a point of interest, I asked Graham if, while he is fitting the ARB bull bar to my car he could also fit a coolant loss sensor. Graham tells me that it is unnecessary as the 4.8 GRX has a cylinder head temperature sensor and that once it reaches 155°, it automatically switches off the engine to prevent damage. I had no idea but suffice to say that I am not going to bother with the coolant loss sensor then.
Graham also tells me that the 4.8 has a very sophisticated electronic management system and that one should really leave it well alone.
For what it is worth.
Graham also tells me that the 4.8 has a very sophisticated electronic management system and that one should really leave it well alone.
For what it is worth.
- SJC
- Patrolman 1000+
- Posts: 3190
- Joined: 23 Nov 2014 14:20
- Full Name: SJC
- Nickname: Fanus
- Home Town: Nelspruit
- Current 4x4: Patrol 4.2 SGL
- Home Language: Afrikaans/English
- Has thanked: 195 times
- Been thanked: 171 times
Re: Coolant Loss Sensor for 4.8
Madman sells a coolant level detection device: http://madman.co.za/index.php/products1 ... ector-v2-0
Pity is doesnt also measure temperature...
Pity is doesnt also measure temperature...
‘96 GQ 4.2 SGL
‘01 GU 4.5 GRX
‘08 GU TD42 BAKKIE
‘01 GU 4.5 GRX
‘08 GU TD42 BAKKIE
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
Re: Coolant Loss Sensor for 4.8
That will work great idea ..... perfect for older petrol engines especially the 4.8
-
- Patrolman
- Posts: 902
- Joined: 19 Jun 2013 15:16
- Full Name: Clem Daniel
- Nickname: Clem
- Home Town: Johannesburg
- Current 4x4: Patrol 4.8
- Home Language: English
- Has thanked: 35 times
- Been thanked: 37 times
Re: Coolant Loss Sensor for 4.8
Well, yes but the point is that the 4.8 doesn't need it. Its already got a self protection mechanism built in.
- SJC
- Patrolman 1000+
- Posts: 3190
- Joined: 23 Nov 2014 14:20
- Full Name: SJC
- Nickname: Fanus
- Home Town: Nelspruit
- Current 4x4: Patrol 4.2 SGL
- Home Language: Afrikaans/English
- Has thanked: 195 times
- Been thanked: 171 times
Re: Coolant Loss Sensor for 4.8
Might be a good add-on for a 4.5 or a 4.2...
‘96 GQ 4.2 SGL
‘01 GU 4.5 GRX
‘08 GU TD42 BAKKIE
‘01 GU 4.5 GRX
‘08 GU TD42 BAKKIE
Who is online
Users browsing this forum: No registered users and 10 guests