Bumper Parts Code

Post Reply
Mark B
Newbie
Newbie
Posts: 8
Joined: 31 Mar 2013 16:25
Full Name: Mark S Bennett
Nickname: Mark B
Home Town: Windhoek
Current 4x4: Toyota Prado
Home Language: english
Has thanked: 17 times

Bumper Parts Code

Post by Mark B » 23 Sep 2014 13:38

Who can assist? I am based in Namibia and am now returning to South Africa and want to bring my Nissan Patrol (2013; GL; 3ltr, diesel – picture attached) back with me. One of the problems I have is that I have to get a SA National Regulator for Compulsory Specifications (NRCS) Letter of Authority. I have established that my Patrol does not comply with SA vehicle standards. Unfortunately I have Japanese specifications tail light units - which are not acceptable (I also have to swap safety belts).

I have been told I have to get the “SA model” Patrol bumper with the light units in them. Unfortunately Nissan SA cannot find my Patrol’s VIN number on their system (it's on the Japanese system) – so they claim that they cannot figure out what bumper I need to get as they cannot access the part code (seems bizarre).

Does any one have any idea as to what the Nissan parts code is for this bumper? (see picture of the silver – no number plate Patrol). Are there any Patrol owners in Namibia that have upgraded their rear bumper and have one to sell. Any other ideas as to how I can solve this problem? I have attached a picture of my Patrol.
Attachments
Bennett - My Patrol - bumper needs to be replaced.jpg
My Patrol with bumper that needs to be replaced
Bennett - My Patrol - bumper needs to be replaced.jpg (2.46 MiB) Viewed 2327 times
Patrol - with SA Bumper.jpg
Patrol with a Bumper with SA approved tail lights
Patrol - with SA Bumper.jpg (200.38 KiB) Viewed 2327 times
Mark B
Windhoek

User avatar
Marino4x4
Patrolman
Patrolman
Posts: 562
Joined: 19 Oct 2011 12:15
Full Name: Marinus Potgieter
Nickname: Marino4x4
Home Town: Bloemfontein
Current 4x4: Nissan Patrol
Home Language: Afrikaans
Location: Bloemfontein
Has thanked: 15 times
Been thanked: 60 times

Re: Bumper Parts Code

Post by Marino4x4 » 23 Sep 2014 13:50

Hi Mark

Try to contact David Volschenk +27 83 4 9 9 one five 88. He got some Patrols and Safari's he striped. I think all will be pre-facelift models, but it might work. Also I think a replacement bumper like ARB, EFS or the likes might be cheaper than the Nissan one. You can look at one of these.

I am sure one of the 3.0 guys will get a quite for you.

Beat of luck. :thumbup:
Patrol 4.5 GL 1998

Terrain 4X4 Parts

User avatar
Grant
Patrolman 1000+
Patrolman 1000+
Posts: 1621
Joined: 29 Apr 2009 14:52
Full Name: Grant Francis
Nickname: Grant
Home Town: Mid Rand Estates
Current 4x4: Ford Ranger
Mini Countryman
Specialized Epic
Specialized Crave Single Speed
Home Language: English
Location: Midrand
Has thanked: 3 times
Been thanked: 20 times

Re: Bumper Parts Code

Post by Grant » 23 Sep 2014 13:53

Hi Mark,


Also send G MAN a pm as he is based in Capetown. He has made replacement bumper for your Patrol.
Specialized Epic

You can't expect to be old and wise
if you were never young and crazy

User avatar
Tinus lotz
Moderator
Posts: 6615
Joined: 29 Aug 2010 13:07
Full Name: Tinus lotz
Nickname: Tinus lotz
Home Town: Centurion
Current 4x4: Nissan patrol 4.8 GRX 2005

Toyota 2.7 legend 35 LWB 4X4
Home Language: Afrikaans
Has thanked: 503 times
Been thanked: 240 times

Re: Bumper Parts Code

Post by Tinus lotz » 23 Sep 2014 15:00

Mark if I was you I will just fit the tail lights in the bumper wires will be there or speak to Ettiene on the forum he is in the process fitting a steel bumper on the back so you can buy his old one from him pm me if you need more details. ..
The top lights are avalible from graham pathmaker on the forum for about 2500 for the set that has the correct coulours in just plug them in hope this helps

Etienne Gous
Full Member
Full Member
Posts: 46
Joined: 02 Apr 2014 20:28
Full Name: Etienne Gous
Nickname: Etienne
Home Town: Pretoria
Current 4x4: Nissan Patrol 4.8 GRX
Toyota Landcruiser
Home Language: Afrikaans
Been thanked: 7 times

Re: Bumper Parts Code

Post by Etienne Gous » 23 Sep 2014 16:49

Hi Mark
Yes, I may be able to help as I am fitting a steel rear bumper.
Please Pm me

User avatar
Peter Connan
Moderator
Posts: 4965
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.2SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 189 times
Been thanked: 274 times

Re: Bumper Parts Code

Post by Peter Connan » 23 Sep 2014 17:50

How long do you have from arriving here to presenting the vehicle for scrutineering?

Surely one can find a forum member who will swop bumpers for a week or two?

On the other hand, as far as I am concerned the plastic bumper is almost a liability. Maybe consider a steel bumper?
Mag ons ons kenniskry met lekkerkry aanhoukry.

User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5468
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 175 times
Been thanked: 205 times

Re: Bumper Parts Code

Post by ricster » 23 Sep 2014 17:58

Tinus, I think those tail lights on his Patrol ( white one ) are fine for SA as the top I assume is indicators ( orange globe inside ) and revers and brake and tail tights at the bottom.

I see 2 options..... first option is to get yourself truck taillights ( possibly LED ones ) and cut 2 holes each side and mount them in. Wiring harness runs right there and you may need to splice into the wires unless you can get a plug to match. Second option is to get that bumper from Etienne straight swap over and possibly even direct plug in of wires.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD

User avatar
Kagiso II
Patrolman 1000+
Patrolman 1000+
Posts: 3472
Joined: 10 Jun 2009 16:58
Full Name: Mac Mc Menamin
Nickname: Oom Mac [Uncle Mac] [Uncle] [Oompie] Kagiso
Home Town: BrentwoodPark, Benoni
Current 4x4: 1982 Datsun Safari 2,8 aka LOBO; [1,300,000 Km verby !]
'99 PATROL 4,2 diesel.
2012 Jimny [SWAMBO se Kantoor-toe]
Home Language: AFRIKAANS
Location: Benoni and wherever the Outreach takes me.
Has thanked: 227 times
Been thanked: 85 times
Contact:

Re: Bumper Parts Code

Post by Kagiso II » 23 Sep 2014 20:05

OR get the standard taillight from the older ISUZU bakkie set in the bumper [less the R100 each] .. cut to fit in bumper at back .
Or go as Rictser suggests .. the LED round lights are GOOD looking [see the rear bumper on Herrie op Safari se UNGILI]

you can even go as low as just firring those teenager puisie liggies off a Landrammel .. :rolling:
Don't bring God down to your level of faith ... bring your faith up to His level!

Post Reply

Return to “11. Chassis, Bodywork & Trim”

Who is online

Users browsing this forum: W3C [Validator] and 2 guests