Side Mirror Repair

Post Reply
User avatar
iandvl
Patrolman 1000+
Patrolman 1000+
Posts: 1763
Joined: 12 Jan 2015 13:26
Full Name: Ian de Villiers
Nickname: Ian
Home Town: Garsfontein
Current 4x4: Nissan Patrol 4.5 GRX
Home Language: English
Has thanked: 442 times
Been thanked: 670 times

Side Mirror Repair

Post by iandvl »

Shortly after getting the 4.8 for the wife, she decided to be windgat reversing out the garage, not considering that the vehicle is bloody big and there is not much clearance between the side mirrors and the garage door.

In short: left hand mirror was busted. Glass broke, cracks on the housing (not very serious), and the entire mechanism was just floppy and loose. I patched up the damage and had a new mirror cut and fitted at Autoglass, but this was not automotive mirror glass, which means the perspective you have when using it is just entirely wrong...

Problem was: I was easily able to get a second hand mirror (dankie David), but "chromed" mirrors are in short supply, and I could only get a black one. So I decided to repair the chrome cover properly, and build the "new" mirror mechanism into the chrome mirror housing to get rid of the "floppiness"...

So here is a short, photographic howto of how to remove the mirror from the vehicle, as well as dismantle the actual assembly.

To get the mirror off, step one is to remove the piece of trim on the inside front corner of the window. This is simply held in place by to clips. You can use a screwdriver with a rag on the bodywork / trim to prevent damaging the finish.

Once that is removed, one needs to remove the interior of the door panel.

Remove the screw from the door "opener" handle. Do not remove the "trim" around the opener (more on this in a bit).
Jerk off the back end of the arm rest from the rear side of the door and remove.
Remove the screw from the door "handle" in the front part of the armrest.
Unscrew the three silver screws at the top of the "disassembled" door handle.
20181007_105317.jpg
20181007_105317.jpg (345.47 KiB) Viewed 7319 times
20181007_105117.jpg
20181007_105117.jpg (319 KiB) Viewed 7319 times
20181007_104945.jpg
20181007_104945.jpg (353.95 KiB) Viewed 7319 times
20181007_104943.jpg
20181007_104943.jpg (266.65 KiB) Viewed 7319 times
The next step is to remove the door panel. This is a little tricky, as it is only clipped in place. The panel is made of masonite, and the clips break out easily. All the clips are on the outside edge of the door. So what I did was to peer between the door and the interior panel from the edges to locate the orange clips, and then to use a large flat screw driver to pry the individual clips out slowly. It worked. I got the panel off without breaking anything... :rolling: :rolling:

Once the door is unclipped and loose, it will only be held in place by the lip at the top which hooks in where the window is. Git the panel a little of a jerk towards the inside of the vehicle, and the "trim" surrounding the door opener will clip out without damaging anything. At this point, the door panel can be removed by lifting it out towards the top - so that the lip over the window sill comes out.
20181007_105242.jpg
20181007_105242.jpg (367.91 KiB) Viewed 7319 times
Next step is to disconnect the mirror control cable and remove the mirror. Trace the mirror cable into the plastic cover inside the door, and unplug. The mirror itself is help in place by three bolts. Remove them from the inside of the door, and then remove the mirror from the outside.
20181007_105244.jpg
20181007_105244.jpg (279.96 KiB) Viewed 7319 times
20181007_105317(0).jpg
20181007_105317(0).jpg (290.79 KiB) Viewed 7319 times
20181007_105420.jpg
20181007_105420.jpg (352.31 KiB) Viewed 7319 times
The next step was to strip the mirror assembly. Since I was rebuilding the entire control mechanisms into a new housing, I had to cut off the plug from the control cable as otherwise I would not have got it out of the housing. First step is to remove the cover at the base of the the mirror mount by removing the screw. This will expose three screws. These can be removed. The single screw on the inside edge of the mirror (ie: closest to the vehicle) also needs to be removed. Apologies - I got no photograph of this.
20181007_105553.jpg
20181007_105553.jpg (298.37 KiB) Viewed 7319 times
The tricky bit was figuring out how to remove the mirror glass. But it is actually dead easy. The mirror glass clips in using clips. When removing, one needs to get the clips at the bottom disengaged first, then the mirror can swivel upwards and one can remove the glass by pulling downwards (ie: towards the bottom of the mirror) to disengage the clips at the top.

Sadly, the photographs of this are not very clear, but let us try anyways... To get the clips at the bottom to disengange, force the mirror at the top so that you've got a gap between the glass and the assembly at the bottom end of the mirror. In the photo you may just make out a piece of plastic on the back of the glass. Use a small flat screw driver to apply a bit of leverage between the class and the plastic, and the clips will disengage. At this point, the glass can be removed by pulling towards the bottom end of the mirror.
20181007_105944.jpg
20181007_105944.jpg (222.08 KiB) Viewed 7319 times
20181007_110003.jpg
20181007_110003.jpg (284.97 KiB) Viewed 7319 times
One of the caveats here, is that when removing the glass, the bottom end controller boot has a habit of climbing out of it's recess. You need to get it back into the recess, or the motor is not going to work properly. Simply use a small flat screwdriver to get it reseated....
20181007_110751.jpg
20181007_110751.jpg (236.44 KiB) Viewed 7319 times
20181007_110822.jpg
20181007_110822.jpg (191.89 KiB) Viewed 7319 times
There are three identical big screws on the back of the controller board which hold the mirror to the housing. Remove them, and you will be able to remove the controller board from the housing.

Re-assembly is pretty much the reverse of assembly. Remember that, when re-attaching the mirror glass, push the glass up from the bottom in order to engage the top clips. After that, press down hard against the glass at the bottom in order to get the bottom clips to engage.
20181007_121215.jpg
20181007_121215.jpg (441.84 KiB) Viewed 7319 times
Anyways, simple. Hope it helps someone.

Oh - as a side note: I've got the following available. GRX mirror. Black. Controller mechanism a little damaged. Housing perfect. Fitted with generic mirror glass and not automotive spec. If anybody needs it, let me know.
20181003_094101.jpg
20181003_094101.jpg (380.59 KiB) Viewed 7319 times
Ian de Villiers

Patrol 4.5 GRX
Jurgens XT65 2x0 with Super Select Zero
ORRA: H80
User avatar
hugejp
Patrolman 1000+
Patrolman 1000+
Posts: 2052
Joined: 21 Oct 2014 21:01
Full Name: JP Viviers
Nickname: Oupoot
Home Town: JHB
Current 4x4: THE PATROL COLLECTION
2004 4.8 GRX TURBO "Tinkerbell"
2003 TD42T GRX "The Coal Roller"
Home Language: Half & Half
Has thanked: 211 times
Been thanked: 217 times

Re: Side Mirror Repair

Post by hugejp »

:goodpost:

Great write-up Ian!
----------------------------------------------------------------------

You CAN with a NISSAN!

Jy KAN met 'n DATSUN!
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Side Mirror Repair

Post by ricster »

Nicely done there Ian !!! :thumbup: :thumbup: :thumbup:
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Anthony Forgey
Senior Member
Senior Member
Posts: 466
Joined: 07 Apr 2016 09:46
Full Name: Anthony Forgey
Nickname: Anthony
Home Town: Randburg
Current 4x4: 98 4.2D (turbo'd)
Home Language: English
Has thanked: 146 times
Been thanked: 186 times

Re: Side Mirror Repair

Post by Anthony Forgey »

really helpful post Ian :thumbup:
Intelligence is measured in smarts, stature is measured in hearts
gupster
Senior Member
Senior Member
Posts: 174
Joined: 12 Jan 2014 07:25
Full Name: Barry Guppy
Nickname: Baz
Home Town: Hibberdene
Current 4x4: 2001 Nissan Patrol 3.0 GRX
2005 Nissan Patrol 3.0 GR
Home Language: English
Has thanked: 136 times
Been thanked: 31 times

Re: Side Mirror Repair

Post by gupster »

And detailed too Ian, thanks for the post
Have Troll, will travel.
Post Reply

Return to “11. Chassis, Bodywork & Trim”

Who is online

Users browsing this forum: No registered users and 0 guests