Rims for 2013 GRX
-
- Junior Member
- Posts: 14
- Joined: 05 Apr 2010 07:53
- Full Name: Kobus Burger
- Nickname: Kobus Burger
- Home Town: Johannesburg
- Current 4x4: Nissan Patrol 2013 GRX 4.8
- Home Language: Afrikaans
- Has thanked: 1 time
Rims for 2013 GRX
I bought my fourth Patrol from a dealer last week. The dealer bought the low km vehicle from the bank and I was fortunate enough to contact the previous owner to confirm the 25000 km on the clock. However he also took the expensive aftermarket tyres and rims off when he heard that the bank is coming to reposes the vehicle and replaced it with Isuzu rims and tyres. I only notice that the tyres were the wrong size as the dealer used the Isuzu tyres and bought new A line rims which looked fine on the vehicle. When I collected the vehicle and drove on the highway the Patrol started shaking violently. My wife who was driving behind me phoned me and told me that all the wheels were buckling.
After speaking to the dealer in a foreign language with a lot of f's in it he said I must have it repaired and they would pay for it. I went to various "specialists" one said it was the diff and the other said it was side shafts another that the rims were bent. I went into a panic mode and wanted to return the vehicle. The Johan from Ironman in Alberton came to rescue, he said that we must go to Autoquip and a very helpful Alex discovered that the rim supplier in Benoni fitted a 108 rim on a center hub of 110. Can you believe it!
Now the second part of the story starts, they cannot find any rims that is in stock to fit over the free wheeling hubs of the Patrol. Not A-Line Black rhino or Dick Cepek and the OE rims from Nissan are R15000 each. I now have a Patrol on blocks till the consignment of Dick Cepek rims arrive "maybe" next week.
Can somebody please give me some advise on other make of rims or even better a set of original rims in a good condition at a reasonable price.
Please help!!
After speaking to the dealer in a foreign language with a lot of f's in it he said I must have it repaired and they would pay for it. I went to various "specialists" one said it was the diff and the other said it was side shafts another that the rims were bent. I went into a panic mode and wanted to return the vehicle. The Johan from Ironman in Alberton came to rescue, he said that we must go to Autoquip and a very helpful Alex discovered that the rim supplier in Benoni fitted a 108 rim on a center hub of 110. Can you believe it!
Now the second part of the story starts, they cannot find any rims that is in stock to fit over the free wheeling hubs of the Patrol. Not A-Line Black rhino or Dick Cepek and the OE rims from Nissan are R15000 each. I now have a Patrol on blocks till the consignment of Dick Cepek rims arrive "maybe" next week.
Can somebody please give me some advise on other make of rims or even better a set of original rims in a good condition at a reasonable price.
Please help!!
- Tinus lotz
- Moderator
- Posts: 7579
- Joined: 29 Aug 2010 13:07
- Full Name: Tinus lotz
- Nickname: Tinus lotz
- Home Town: Centurion
- Current 4x4: Nissan patrol 4.8 GRX 2005
Toyota 2.7 legend 35 LWB 4X4 - Home Language: Afrikaans
- Has thanked: 800 times
- Been thanked: 549 times
Re: Rims for 2013 GRX
Patrols are very heavy and their mags are stronger ....
I have 2003 16 inch grx rims on my post 2005 4.8 for more flotation more rubber .....sure they can machine the hole for freewheeling hubs ??? Or come grab a set of 6mm spacers of me .....like wilkie said cant you buy original rims from the owner?
I have 2003 16 inch grx rims on my post 2005 4.8 for more flotation more rubber .....sure they can machine the hole for freewheeling hubs ??? Or come grab a set of 6mm spacers of me .....like wilkie said cant you buy original rims from the owner?
- Peter Connan
- Moderator
- Posts: 6016
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Rims for 2013 GRX
Kobus, take the rims to a machine shop/engineering works and have them machine out a step toa depth of 8-10mm.
I have had A-lines that have been "opened up" like this for a 150 000km of pretty tough going, and no issues. If you can't find a machine shop, PM me and I will send you the number of the guy who did mine.
Another alternative is to get a set of 6mm spacers. Ricster here on the forum sells them at a very reasonable price (actually very unreasonable, for him).
I have had A-lines that have been "opened up" like this for a 150 000km of pretty tough going, and no issues. If you can't find a machine shop, PM me and I will send you the number of the guy who did mine.
Another alternative is to get a set of 6mm spacers. Ricster here on the forum sells them at a very reasonable price (actually very unreasonable, for him).
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Full Member
- Posts: 40
- Joined: 04 Aug 2011 19:32
- Full Name: Brett Bignoux
- Nickname: Brett Bignoux
- Home Town: Heatonville
- Current 4x4: Datsun Safari Pick Up 1982 , Nissan Ruff , Yamaha Wolverine . Datsun Safari Wagon 1982
- Home Language: English
- Has thanked: 2 times
- Been thanked: 9 times
Re: Rims for 2013 GRX
GOOD DAY GENTS .
What about asking the guy that imports second hand patrols for spares ? (I think his name is Graham)
I hope this helps you . Bummer , you have a patrol and can't use it !
What about asking the guy that imports second hand patrols for spares ? (I think his name is Graham)
I hope this helps you . Bummer , you have a patrol and can't use it !
Can we get rid of STUPID DRIVERS before they kill us ?
- SJC
- Patrolman 1000+
- Posts: 3201
- Joined: 23 Nov 2014 14:20
- Full Name: SJC
- Nickname: Fanus
- Home Town: Nelspruit
- Current 4x4: 4.2 GQ (TB42)
- Home Language: Afrikaans/English
- Has thanked: 199 times
- Been thanked: 173 times
Re: Rims for 2013 GRX
http://www.errolstyres.co.za/wheel/a-li ... 4/82460002
These aline wheels got a c/b of 110 and fits a patrol. (Got a set on my 4.5 gu.)
I actualky was planning to sell them when doing next 5k tyre rotate. As i got a set of patrol steelies i want to fit...
But as Tinus & Peter said, 6mm spacers should also sort the 108vs110 c/b issue. Afaik Michael got 108 c/b wheels on his patrol with 6mm spacers. Michael?
These aline wheels got a c/b of 110 and fits a patrol. (Got a set on my 4.5 gu.)
I actualky was planning to sell them when doing next 5k tyre rotate. As i got a set of patrol steelies i want to fit...
But as Tinus & Peter said, 6mm spacers should also sort the 108vs110 c/b issue. Afaik Michael got 108 c/b wheels on his patrol with 6mm spacers. Michael?
1996 Nissan Patrol 4.2 SGL
-
- Patrolman 1000+
- Posts: 1402
- Joined: 24 Feb 2014 15:33
- Full Name: Errol Wilken
- Nickname: Wilkie
- Home Town: Pretoria
- Current 4x4: 1999 4.5 GRX Nissan Patrol
2004 BMW 3.0D X5 - Home Language: Afrikaans
- Has thanked: 69 times
- Been thanked: 92 times
Re: Rims for 2013 GRX
Kobus I have a set of 5 A-line rims that came off a patrol and a set of 5 ome steel rims(with tyres)
-
- Senior Member
- Posts: 76
- Joined: 09 Dec 2013 20:05
- Full Name: Rob Marussi
- Nickname: Rob
- Home Town: JHB
- Current 4x4: Nissan Patrol Y62
2009 4.8 Patrol
Nissan Navara V9X
1960 Willis Jeep
3.5 Pajero - Home Language: English
- Location: Johannesburg Sandringham
- Has thanked: 3 times
- Been thanked: 5 times
Re: Rims for 2013 GRX
Hey I have a set of aftermarket rims only four though and a spare wheel that is the original mag. Give me a call if your interested or email me robm@rgmprojects.com.
- Michael
- Moderator
- Posts: 2479
- Joined: 05 Mar 2014 14:39
- Full Name: Michael
- Nickname: Steyn
- Home Town: Centurion
- Current 4x4: Patrol GU 4.2 Turbo Diesel
- Home Language: Afrikaans
- Location: Centurion, PTA
- Has thanked: 189 times
- Been thanked: 336 times
Re: Rims for 2013 GRX
Jip Fanus is correct. I do have a set of 108's on my Patrol, Cedric's 6mm spacers did the job and it clears the freewheel hub section where it needs to be 110mm.SJC wrote:But as Tinus & Peter said, 6mm spacers should also sort the 108vs110 c/b issue. Afaik Michael got 108 c/b wheels on his patrol with 6mm spacers. Michael?
I did quite a bit of research when I bought mine.....let me just have a look again as I think there were a set somewhere that were 110
"The Just shall live by Faith" Rom1:17
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
- jonathan
- Senior Member
- Posts: 269
- Joined: 20 Aug 2012 16:24
- Full Name: Jonathan Venter
- Nickname: jonathan
- Home Town: Jacobsbaai
- Current 4x4: 2005 4.8 GRX
- Home Language: Afrikaans
- Has thanked: 7 times
- Been thanked: 40 times
Re: Rims for 2013 GRX
It seems to be common practice for when you're in financial trouble to strip the valuable bits of a vehicle before the bank shows up. A colleague of mine is involved with a finance institution that lends specifically to transport companies. Often when the truck eventually needs to repossessed it's almost not the same vehicle with all the good bits taken and of replaced with crappy second hand bits and pieces, including tyres
Who is online
Users browsing this forum: No registered users and 6 guests