stabilizer links
-
- Full Member
- Posts: 22
- Joined: 03 Oct 2011 21:55
- Full Name: craig van rensburg
- Nickname: Craig
- Home Town: Sedgefield
- Current 4x4: 2000 4.5 grx
- Home Language: english
stabilizer links
Does anyone know where i can buy front stabilizer links for 4.5
or is it only agents!
thanks
Craig
or is it only agents!
thanks
Craig
- Peter Connan
- Moderator
- Posts: 6011
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 985 times
Re: stabilizer links
Craig you can buy a sealed M10 ball joint from Bearing Man or similar, some threaded bar from the bolt and nut shop and make your own for a fraction of the price.
Edit: M10 is the correct size for the Y60.
For the Y61, you need M12...
Edit: M10 is the correct size for the Y60.
For the Y61, you need M12...
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Grant
- Patrolman 1000+
- Posts: 1269
- Joined: 29 Apr 2009 14:52
- Full Name: Francis
- Nickname: Grant
- Home Town: Rosendal
- Current 4x4: 2020 70 Series V8 LC
Hilux 2,4 4x4 SC Dakar - Home Language: English
- Location: Eastern Free State
- Has thanked: 3 times
- Been thanked: 25 times
Re: stabilizer links
Craig,
I have a used set from my GQ. You are welcom to them if they fit.
I have a used set from my GQ. You are welcom to them if they fit.
V8 Power
You can't expect to be old and wise
if you were never young and crazy
You can't expect to be old and wise
if you were never young and crazy
- jonathan
- Senior Member
- Posts: 269
- Joined: 20 Aug 2012 16:24
- Full Name: Jonathan Venter
- Nickname: jonathan
- Home Town: Jacobsbaai
- Current 4x4: 2005 4.8 GRX
- Home Language: Afrikaans
- Has thanked: 7 times
- Been thanked: 40 times
Re: stabilizer links
Hi guys. My rear stabilizer links were quite badly worn so I removed them and following Peter's advice from the above post made some replacements at really a fraction of the cost! But then I also read some other threads on the stabilizers and also saw this section in the workshop manual when I was about to re-install them:
"Roll rigidity is increased by activating the stabilizer function (turning the stabilizer ON) on good roads. On rough
roads, deactivating the stabilizer function (turning the stabilizer OFF) reduces stabilizer swing-back behavior.
As a result, the stabilizer release device serves to increase driving capability and riding comfort on rough roads.
The stabilizer release device is electrically activated (turned ON) or deactivated (turned OFF) by the stabilizer
switch in the driver’s compartment."
This obviously applies to the models with an automatic disconnecting link, but the concept remains the same. So based on this and the fact that we mostly use our Patrols on rough roads , I'm not going to replace the rear stabilizer. Now the front I'm not so sure. I've been driving around without the rear for a while and it feels fine, but would driving without both front and rear still be safe?
"Roll rigidity is increased by activating the stabilizer function (turning the stabilizer ON) on good roads. On rough
roads, deactivating the stabilizer function (turning the stabilizer OFF) reduces stabilizer swing-back behavior.
As a result, the stabilizer release device serves to increase driving capability and riding comfort on rough roads.
The stabilizer release device is electrically activated (turned ON) or deactivated (turned OFF) by the stabilizer
switch in the driver’s compartment."
This obviously applies to the models with an automatic disconnecting link, but the concept remains the same. So based on this and the fact that we mostly use our Patrols on rough roads , I'm not going to replace the rear stabilizer. Now the front I'm not so sure. I've been driving around without the rear for a while and it feels fine, but would driving without both front and rear still be safe?
- Peter Connan
- Moderator
- Posts: 6011
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 985 times
Re: stabilizer links
Many GQ's don't have front stabilisors at all.
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Junior Member
- Posts: 12
- Joined: 06 Sep 2012 18:55
- Full Name: SOULBY KITCHING JACKSON
- Nickname: OEBIE
- Home Town: KIMBERLEY
- Current 4x4: PATROL GRX 4.8
- Home Language: AFRIKAANS
- Has thanked: 3 times
Re: stabilizer links
Hi! Would like to know the outcome of this feed. What happens if the front stabilizer is also disconnected? I had wingnuts made for the back stabilizer so I could disengage it more easily - one fell off on a corrugated road to Mokala and I removed the other one just before it also dropped.
On the way back to Kimberley, I was towing an Imagine Comfortvan and no instability could be detected even at 120 km/hr. Did the caravan stabilize the Patrol? Is it necessary to bolt it back on? What will happen if the front stabilizer is also disconnected? Oh yes, I had stiffer coils and Koni shocks fitted front and back.
On the way back to Kimberley, I was towing an Imagine Comfortvan and no instability could be detected even at 120 km/hr. Did the caravan stabilize the Patrol? Is it necessary to bolt it back on? What will happen if the front stabilizer is also disconnected? Oh yes, I had stiffer coils and Koni shocks fitted front and back.
- Peter Connan
- Moderator
- Posts: 6011
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 985 times
Re: stabilizer links
As far as I am concerned, stabilizer is a misleading name for this item. It is correctly called an anti-roll bar.
On a double live-axle vehicle, it has almost no effect on the vehicle's stability, but does reduces body roll a lot.
My car has been running without anti-roll bars for several years now, and I am quite happy, but a number of other guys don't like it.
Unless you have a lift larger than 2" (50mm), or carry heavy roof loads, it has almost no effect on the ultimate rollover angle of the vehicle, or on safety, it only affects how the vehicle feels.
IF you are interested, I am making a batch of quick-disconnects...
On a double live-axle vehicle, it has almost no effect on the vehicle's stability, but does reduces body roll a lot.
My car has been running without anti-roll bars for several years now, and I am quite happy, but a number of other guys don't like it.
Unless you have a lift larger than 2" (50mm), or carry heavy roof loads, it has almost no effect on the ultimate rollover angle of the vehicle, or on safety, it only affects how the vehicle feels.
IF you are interested, I am making a batch of quick-disconnects...
Mag ons ons kenniskry met lekkerkry aanhoukry.
- Alex Roux
- Patrolman 1000+
- Posts: 2627
- Joined: 11 Jul 2011 10:54
- Full Name: Alexander Roux
- Nickname: Calculator
- Home Town: Johannesburg
- Current 4x4: 2004 GU 3TDi (Lexus) - aka "Witblits" (sold)
2005: GU TD42 - aka "Masewa"
1996: GQ TB48 conversion - aka "Skilpad"
1993: GQ SWB TB42 - aka "Shortie"
1985: MQ Patrol (Safari) SD33 - aka "Toro" - Home Language: Afrikaans
- Has thanked: 49 times
- Been thanked: 240 times
Re: stabilizer links
Peter
Just as a matter of interest:
When disconnected, my GU has lots of body roll. It annoys me in traffic, so I like the disconnects on it.
But neither Shortie nor Skilpad roll much, and neither have the "stabilisers" on.
It may be due to less weight on the GQs?
Just as a matter of interest:
When disconnected, my GU has lots of body roll. It annoys me in traffic, so I like the disconnects on it.
But neither Shortie nor Skilpad roll much, and neither have the "stabilisers" on.
It may be due to less weight on the GQs?
Skilpad, Shortie, Toro & Masewa
- Peter Connan
- Moderator
- Posts: 6011
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 985 times
Re: stabilizer links
Alex, I would love to know how much the roof rack on your GU weighs. I suspect it is quite heavy.
Having said that, the GU is officially 200kg heavier than the GU, and all that weight is up top. And of course, the X-link on the GU also reduces the roll resistance of the front suspension...
Having said that, the GU is officially 200kg heavier than the GU, and all that weight is up top. And of course, the X-link on the GU also reduces the roll resistance of the front suspension...
Mag ons ons kenniskry met lekkerkry aanhoukry.
Who is online
Users browsing this forum: No registered users and 1 guest