Tonteldoos and fire piston

Please tell us about your DIY projects, tips and tricks
Post Reply
Iaan du Toit
Full Member
Full Member
Posts: 39
Joined: 27 Dec 2015 09:25
Full Name: Iaan du Toit
Nickname: Iaan
Home Town: Sabie
Current 4x4: Patrol pickup
Patrol 4.8
Hilux D4D
Home Language: Afrikaans
Has thanked: 10 times
Been thanked: 43 times

Tonteldoos and fire piston

Post by Iaan du Toit »

My whole life I have enjoyed working with my hands and making things. Lately I became intrigued by the Tonteldoos as used by our forefathers. After a couple of weeks of trail and error I am capable of starting a fire like the Voortrekkers did.

In my reading and research I came upon the term fire piston. As I have never heard of this it got my attention. There are a lot of you tube videos on the fire piston.

True to my nature I had to make one that work. Whenever I make something I always look at what scrap I have on hand. Then it struck me, I have two shot Patrol bonnet struts. After some time on the lathe I got it to work today. I first tried to use the tube and existing seal of the bonnet strut. I could not get the needed compression. I then machined a groove for an o-ring in the existing seal. Still the needed compression eluded me. My next idea was to machine a brass plug with a tight fit.. This worked. Next I would like to machine the brass plug to a smaller diameter an fit two o-rings.

I would like to make some changes to the current prototype when time allow. I will update this post with future improvements.

Now I can start a fire with steel and flint as well as a fire piston.

As a diesel fanatic I find it fascinating to be able to start a fire with the same principle that a diesel engine operate on.
Attachments
20170718_100301.jpg
20170718_100301.jpg (130.67 KiB) Viewed 6709 times
DSC_9676.jpg
DSC_9676.jpg (160.07 KiB) Viewed 6709 times
Wat ek is, is net genade.
Wat ek het is net geleen.
User avatar
Tinus lotz
Moderator
Posts: 7579
Joined: 29 Aug 2010 13:07
Full Name: Tinus lotz
Nickname: Tinus lotz
Home Town: Centurion
Current 4x4: Nissan patrol 4.8 GRX 2005

Toyota 2.7 legend 35 LWB 4X4
Home Language: Afrikaans
Has thanked: 800 times
Been thanked: 549 times

Re: Tonteldoos and fire piston

Post by Tinus lotz »

Nice.....daai lyk reg ek soek ook sulkes :salute:
User avatar
hugejp
Patrolman 1000+
Patrolman 1000+
Posts: 2052
Joined: 21 Oct 2014 21:01
Full Name: JP Viviers
Nickname: Oupoot
Home Town: JHB
Current 4x4: THE PATROL COLLECTION
2004 4.8 GRX TURBO "Tinkerbell"
2003 TD42T GRX "The Coal Roller"
Home Language: Half & Half
Has thanked: 211 times
Been thanked: 217 times

Re: Tonteldoos and fire piston

Post by hugejp »

Can we place orders?? Forum logo on the side??? :blonde:
----------------------------------------------------------------------

You CAN with a NISSAN!

Jy KAN met 'n DATSUN!
User avatar
Michael
Moderator
Posts: 2479
Joined: 05 Mar 2014 14:39
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans
Location: Centurion, PTA
Has thanked: 189 times
Been thanked: 336 times

Re: Tonteldoos and fire piston

Post by Michael »

Very cool Iaan!!

I actually did not even know these things exist, but I really like it.
What does one use as the fuel to get the fire going?
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Rhett
Senior Member
Senior Member
Posts: 482
Joined: 26 Jan 2016 14:48
Full Name: Rhett van der Stelt
Nickname: Rhett
Home Town: Heidelberg
Current 4x4: 3.2Did Shorty Pajero
Home Language: English
Location: Heidelberg
Has thanked: 163 times
Been thanked: 75 times

Re: Tonteldoos and fire piston

Post by Rhett »

That is awesome Iaan, good thinking there! Let us know how it comes along and if possible, upload a video too :thumbup:
Rhett
https://www.youtube.com/channel/UC9e98c ... XUyixKJavQ

Nissan Patrol 4.8 GRX
Toyota Land Cruiser HJ45
User avatar
Rudolph
Senior Member
Senior Member
Posts: 388
Joined: 15 Feb 2010 18:03
Full Name: Rudolph van Deventer
Nickname: Rudolph
Home Town: Port Alfred
Current 4x4: Nissan Patrol Y61 3.0Di GL (TD42Ti)
Home Language: Afrikaans
Has thanked: 107 times
Been thanked: 32 times

Re: Tonteldoos and fire piston

Post by Rudolph »

Rhett wrote:That is awesome Iaan, good thinking there! Let us know how it comes along and if possible, upload a video too :thumbup:
Awesome! I would also like to see a video on how this fire piston works.
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Tonteldoos and fire piston

Post by ricster »

I've seen something like this on a few survival programmes on dstv, like Bear Grylls etc. They shove a small piece of charcoal or any carbonized material in the tube and bang it hard and fast on a solid surface. the heat generated from the compression stroke pops that material out glowing red !!

This is a brilliant piece of engineering Iaan. Well done mate !!!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Iaan du Toit
Full Member
Full Member
Posts: 39
Joined: 27 Dec 2015 09:25
Full Name: Iaan du Toit
Nickname: Iaan
Home Town: Sabie
Current 4x4: Patrol pickup
Patrol 4.8
Hilux D4D
Home Language: Afrikaans
Has thanked: 10 times
Been thanked: 43 times

Re: Tonteldoos and fire piston

Post by Iaan du Toit »

Michael, for the tonteldoos as well as the fire piston you make your own charcoal. Take pure cotton material, put it in a closed tin can and apply heat, deprived of oxygen you end up with charcoal made out of cotton. People refer to this as char cloth. I find the thicker loosely woven material work better than thinner tightly woven material.

You can also use dried rotten wood applying the same method.

With flint and steel all that is needed is to throw a spark on the charcoal. Once it start glowing you gently blow on the ember, you can add more char cloth combined with dried grass, gently blowing and you can start your fire.

Regarding flint and steel. You have to use a piece of hardened high carbon steel. An old file ground smooth works well. For the flint, not every piece of stone will work. You need a piece of stone with a sharp edge, harder than the steel and test to see if it will throw sparks.

The fire piston work on the same principle as a diesel engine. At the end of the piston you drill a small hole, fill this with some char cloth. You then press the piston into the tube with speed. The same way you have combustion on a diesel engine, the char cloth at the end of the piston ignite and start to glow.

Another way to start your fire from the glowing ember is to use a slow match. Take a piece of 15mm plumbing copper tube. Stick some cotton material (you can use rope, paraffin lamp pit or strands of a mopp head) through from one side till it protrude on the other side. Burn this end with a flame. Now you have charred cotton with a handle . Once you get the ember burning with either method you hold the charred end of the slow match next to the ember, blowing gently.

Once you get the slow match burning you have all the time in the world to transfer the glowing ember to the fire you want to make. To snuff the glowing ember in the slow match put a end cap on the copper pipe.

For the guys wanting a video, I will see what I can do.

I would like to attend the upcoming river trip, my workload permitting. Then I can do a demonstration.

I am sure the kids will have a ball once they realize how easy it is to start a fire like the old timers did.
Wat ek is, is net genade.
Wat ek het is net geleen.
Post Reply

Return to “21. DIY Projects”

Who is online

Users browsing this forum: No registered users and 5 guests