Page 1 of 1
ScanGauge II
Posted: 13 Mar 2017 16:30
by Rhett
Hello guys
Has anyone bought / played around with a ScanGauge II? I know the older model is not compatible but I have seen it more and more on the Toyota 4x4's.
https://www.scangauge.com/products/scangauge-ii/
Looks to be around R 2500 with shipping.
Re: ScanGauge II
Posted: 13 Mar 2017 19:34
by hugejp
I would like to know if it'll see our 2004 4.8 models???
Re: ScanGauge II
Posted: 14 Mar 2017 18:08
by hugejp
I sent them an email, but no response as yet...
Re: ScanGauge II
Posted: 15 Mar 2017 11:39
by Rhett
Thanks JP, I have checked on the Aussie patrol forum and it looks to be a bit of an issue with 4.8 patrols. Check this compatibility list:
http://scangauge.com.au/compatibility-nissan/
It says not compatible for Y61 models. Hopefully they have come up with a solution, hope they reply to you!
Re: ScanGauge II
Posted: 27 Nov 2018 14:28
by aceventura
Any one using a modern Scanguage on a 4.8 GRX?
The website only states : compatible with Nissan Patrol 2007 Onwards
Re: ScanGauge II
Posted: 27 Nov 2018 15:06
by Mamba
I use "Car diagnostics Pro" on my Phone connected to a Bluetooth OBD2 dongle plugged into a 2004 4.8GRX pre face-lift
Re: ScanGauge II
Posted: 28 Nov 2018 09:04
by aceventura
Thanks. What info are you getting back from the ECU? The OBD2 scanner i bought from ebay did not work on the Patrol or my Polo - it was a cheap unit, so I think the unit is crap.
Got a reply from scanguage, so I'm thinking about going that route
Hi Jacques,
Yes ScanGauge2 works well with your 2008 Patrol.
Have a nice day and please let us know if you require further assistance.
Kind Regards,
Boris / Support
ScanGauge Australia
Like us on
www.facebook.com/ScanGaugeAustralia
Re: ScanGauge II
Posted: 28 Nov 2018 11:46
by Mamba
I can see items such as coolant temp, timing, battery voltage and lots more. I can adjust timing, idling and read/ reset fault codes.