Page 1 of 2

Winch fairlead location

Posted: 20 Nov 2016 08:05
by vanhack
289618d1448409532-nissan-patrol-y61-winch-mount-tray-dimensions-y61-winch-3-jpg.jpg
289618d1448409532-nissan-patrol-y61-winch-mount-tray-dimensions-y61-winch-3-jpg.jpg (81.55 KiB) Viewed 5082 times
20161120_090734.jpg
20161120_090734.jpg (45.56 KiB) Viewed 5082 times
So I have my m8000 finally rebuilt, and going to upgrade the solenoids to Albright DC contactors since the original factory wiring is overly complex. Been a while, as I have been lazy and getting carried away with other things, but it's about time I got this mounted.

I would like your opinion on mounting the winch fairled. The original factory winch tray looks like below. I have had the roller fairlead tabs grinded off, and a large portion of the fairlead mounting point remved. Now it is just an upright with enough room for a warn synthetic winch line hawse fairlead.

Image

I can mount to the remaining upright, and have the line go through the bumper by cutting at the right location the plastic bumper, or mount the fairlead to the bashplate that I have and it covers up to just below the number plate. The bash plate is 10mm aluminium, mounted at 5 locations, 3 to the support below the radiator, and 2 points to a bar that arches down to meet the aluminium plate and the bar mounts to the chassis rails. The mounts are 13mm bolts, unrated.

Image

Re: Winch fairlead location

Posted: 22 Nov 2016 07:13
by vanhack
Anyone?

Re: Winch fairlead location

Posted: 22 Nov 2016 07:36
by AndriesS
I can't see your pics?

Re: Winch fairlead location

Posted: 22 Nov 2016 08:53
by vanhack
AndriesS wrote:I can't see your pics?
I hope that works

Re: Winch fairlead location

Posted: 22 Nov 2016 09:17
by AndriesS
Still not, maybe one of the admins can shed light on it?

Re: Winch fairlead location

Posted: 22 Nov 2016 09:25
by vanhack
AndriesS wrote:Still not, maybe one of the admins can shed light on it?
uploaded the photos this time to the post and added to the post inline...hopefully that works

Re: Winch fairlead location

Posted: 22 Nov 2016 12:25
by Michael
AndriesS wrote:Still not, maybe one of the admins can shed light on it?
It displays correct on my side :thumbup:

Re: Winch fairlead location

Posted: 22 Nov 2016 12:37
by SJC
I can also see the pics :thumbup:

Re: Winch fairlead location

Posted: 22 Nov 2016 12:44
by AndriesS
Can see them now

Re: Winch fairlead location

Posted: 22 Nov 2016 12:55
by AndriesS
I prefer to have the fairlead at least level with the drum on the winch. Judging from the pic , if you have it below the number plate it will below the winch drum and I would guess most of the time the rope will run against the upper surface.