Polyurethane Bakkie Liner
-
- Senior Member
- Posts: 52
- Joined: 28 Nov 2017 09:51
- Full Name: Jacques Wilkinson
- Nickname: JacquesW
- Home Town: Kraaifontein
- Current 4x4: Nissan Patrol 4.8
- Home Language: Afrikaans
- Has thanked: 8 times
- Been thanked: 13 times
Polyurethane Bakkie Liner
Hi All
I am looking to cover parts of the car with a polyurethane coating. The States has plenty of popular DIY brands available. None of those brands appears to be available in South Africa however. I have done a bit of looking around and till now the only thing I found that looks like an option is Duram's Durabak product.
Does anyone have experience with this or other locally available products that they are willing to reccomend?
Regards
Jacques
I am looking to cover parts of the car with a polyurethane coating. The States has plenty of popular DIY brands available. None of those brands appears to be available in South Africa however. I have done a bit of looking around and till now the only thing I found that looks like an option is Duram's Durabak product.
Does anyone have experience with this or other locally available products that they are willing to reccomend?
Regards
Jacques
- hugejp
- Patrolman 1000+
- Posts: 2052
- Joined: 21 Oct 2014 21:01
- Full Name: JP Viviers
- Nickname: Oupoot
- Home Town: JHB
- Current 4x4: THE PATROL COLLECTION
2004 4.8 GRX TURBO "Tinkerbell"
2003 TD42T GRX "The Coal Roller" - Home Language: Half & Half
- Has thanked: 211 times
- Been thanked: 217 times
Re: Polyurethane Bakkie Liner
The best product is Line-ex available in Rustenburg & Vereeniging, but its BLOODY EXPENSIVE!
I was quoted 45k to do a complete GU Patrol.
If you find a better option I would be very keen on trying it too.
I was quoted 45k to do a complete GU Patrol.
If you find a better option I would be very keen on trying it too.
----------------------------------------------------------------------
You CAN with a NISSAN!
Jy KAN met 'n DATSUN!
You CAN with a NISSAN!
Jy KAN met 'n DATSUN!
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: Polyurethane Bakkie Liner
The Durabak that I used is brilliant, but doesn't land up very thick, so its not a 4-5mm thick rubber lining so to speak. I used it on my rock sliders and I also painted a strip below the doors to prevent stones chipping the paint. I also did various areas on the undercarriage of the Patrol. it sticks like sheeeet to a blanket, but like I say not thick at all, even after 2-3 coats.
For a bakkie liner, hmmmm... not heavy duty enough in my opinion. but a fantastic product non the less
For a bakkie liner, hmmmm... not heavy duty enough in my opinion. but a fantastic product non the less
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Peter Connan
- Moderator
- Posts: 6016
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Polyurethane Bakkie Liner
I painted my bull bar with Durabak, and like Cedrik says, it's not nearly the same type of stuff as the stuff they spray on to line a bakkie load bin.
It is maybe 1-2mm thick max and is not particularly durable. Mine has places where the coating has come off due to washing with a high pressure spray...
It is maybe 1-2mm thick max and is not particularly durable. Mine has places where the coating has come off due to washing with a high pressure spray...
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Senior Member
- Posts: 52
- Joined: 28 Nov 2017 09:51
- Full Name: Jacques Wilkinson
- Nickname: JacquesW
- Home Town: Kraaifontein
- Current 4x4: Nissan Patrol 4.8
- Home Language: Afrikaans
- Has thanked: 8 times
- Been thanked: 13 times
Re: Polyurethane Bakkie Liner
Thanks Guys
I am planning on using it on the rear bumper, fender flares and door sills, so not in a load bin. Just looking for something a bit more durable and resilient in the face of normal bush scratching than normal paint.
From all the reading I have done most of these products are as good as the effort you put into the surface prep to ensure proper adhesion.
I am planning on using it on the rear bumper, fender flares and door sills, so not in a load bin. Just looking for something a bit more durable and resilient in the face of normal bush scratching than normal paint.
From all the reading I have done most of these products are as good as the effort you put into the surface prep to ensure proper adhesion.
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: Polyurethane Bakkie Liner
Yeah ... prep is everything, but having said that, I did pretty much nothing except a good clean to the secondhand rock sliders I have and they are still holding up well.... very well infact. That is with being trodden on with muddy shoes and all. I do like the finish it gives, even with a brush. I applied it very thick and second and third coated with a drying gap of about 20 - 30 mins in between. Not sure why Peter has peeling issues on his though.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Peter Connan
- Moderator
- Posts: 6016
- Joined: 10 Sep 2010 07:21
- Full Name: Peter Connan
- Nickname: Piet
- Home Town: Kempton Park
- Current 4x4: 1996 Patrol 4.5SGL
- Home Language: Afrikaans
- Location: Kempton Park
- Has thanked: 1067 times
- Been thanked: 987 times
Re: Polyurethane Bakkie Liner
I don't know either, as I had my bull bar professionally glass-bead blasted...
But, it is probably better than "normal" paint, and is pretty scratch-resistant.
But, it is probably better than "normal" paint, and is pretty scratch-resistant.
Mag ons ons kenniskry met lekkerkry aanhoukry.
-
- Senior Member
- Posts: 52
- Joined: 28 Nov 2017 09:51
- Full Name: Jacques Wilkinson
- Nickname: JacquesW
- Home Town: Kraaifontein
- Current 4x4: Nissan Patrol 4.8
- Home Language: Afrikaans
- Has thanked: 8 times
- Been thanked: 13 times
Re: Polyurethane Bakkie Liner
I know if applied to raw metal surfaces (no previous paint/primers etc) their various primer products is required for proper corrosion protection and adhesion.
If layer of paint is allready present it is to be scuffed with medium grid paper to the point where at the very least the gloss cote has been removed to ensure adhesion.
Thanks for your guys input. I think I am going to give it a try. The price is right and the product is generally available from well established brand.
If layer of paint is allready present it is to be scuffed with medium grid paper to the point where at the very least the gloss cote has been removed to ensure adhesion.
Thanks for your guys input. I think I am going to give it a try. The price is right and the product is generally available from well established brand.
- ricster
- Patrolman 1000+
- Posts: 5850
- Joined: 13 Jan 2010 11:16
- Full Name: Cedric Warner
- Nickname: Cedric
- Home Town: Alberton Gauteng
- Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
- Home Language: English
- Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
- Has thanked: 591 times
- Been thanked: 468 times
Re: Polyurethane Bakkie Liner
Cool..... post up some pics as you go along !!!!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
- Carel
- Senior Member
- Posts: 213
- Joined: 25 Jul 2011 08:41
- Full Name: Carel Vos
- Nickname: Carel
- Home Town: Germiston
- Current 4x4: 84 Safari
2001 Patrol 4.5 GRX - Home Language: Afrikaans
- Been thanked: 10 times
Re: Polyurethane Bakkie Liner
I did my Safari's loadbin with Durabak and it is not too bad with a few scuff marks here and there
Work is only hard for those who hardly work
Who is online
Users browsing this forum: No registered users and 11 guests