Remote control programming

pdasilva
Senior Member
Senior Member
Posts: 123
Joined: 03 Jun 2011 14:07
Full Name: Paulo
Nickname: da Silva
Home Town: Kempton Park , Gauteng.
Current 4x4: Nissan Patrol 4.8grx
Suzuki Sidekick 1.6
Home Language: English
Location: Kempton park
Been thanked: 4 times

Remote control programming

Post by pdasilva »

I purchased a new remote for my 2005 Patrol. Does anybody have instructions oh how to programme the remote.

Thanks.
Didi
Newbie
Newbie
Posts: 4
Joined: 30 Aug 2012 23:31
Full Name: Derald Diedericks
Nickname: Didi
Home Town: Kriel
Current 4x4: Nissan Patrol
Home Language: Afrikaans
Been thanked: 2 times

Re: Remote control programming

Post by Didi »

Nissan Patrol Reference Document
Page 49 of 138
KEYLESS REMOTE - REPROGRAMMING
Heres how it’s done:
1. Get in your vehicle and close all the doors.
2. Using your drivers lock button, lock all doors.
3. After doors are locked take your ignition key and insert it and remove it from ignition
switch approximately 6 times within a 10 second period a reasonably quick way. Make
sure the key is all the way out before inserting again.
4. The hazard lights should flash and the doors will unlock.
5. Re-lock the doors using the drivers lock button.
6. Put the key in ignition switch and turn to the on position. Do not start the engine or
you will have to start again.
7. When in the on position hit the lock button on the remote, one time, the hazard
lights should flash.
8. Turn the ignition off and remove the key, open the drivers door and close, then test
the key.
Note: You will have to reprogram all your remotes at once, if you do not your old remotes
will not work. If you have other remotes press their buttons within 7 seconds of the
first one.

Hope this help.
User avatar
Tinus lotz
Moderator
Posts: 7579
Joined: 29 Aug 2010 13:07
Full Name: Tinus lotz
Nickname: Tinus lotz
Home Town: Centurion
Current 4x4: Nissan patrol 4.8 GRX 2005

Toyota 2.7 legend 35 LWB 4X4
Home Language: Afrikaans
Has thanked: 800 times
Been thanked: 549 times

Re: Remote control programming

Post by Tinus lotz »

Good post :thumbup:
User avatar
Jorrie
Patrolman 1000+
Patrolman 1000+
Posts: 2184
Joined: 21 Jun 2011 18:55
Full Name: Jacobus Jordaan
Nickname: Jorrie
Home Town: Pretoria
Current 4x4: 1998 Nissan Patrol 4500 GRX (now in Benji's hands), 2019 Zook Gen 4, 2011 4.8 GRX Patrol Adventure 60
Home Language: English/Afrikaans
Location: Pretoria
Has thanked: 184 times
Been thanked: 165 times

Re: Remote control programming

Post by Jorrie »

Whilst talking about remotes, where can I buy a spare remote for my 1998 Y61?
Jorrie
1998 4500 GRX (Benji)
2011 4800 GRX Adventure 60 (Jorrie)
2011 Jimny Sold (Benji)
2 x 2019 Jimnies (1 x Lizzybean69, 1 x Jorrie)
pdasilva
Senior Member
Senior Member
Posts: 123
Joined: 03 Jun 2011 14:07
Full Name: Paulo
Nickname: da Silva
Home Town: Kempton Park , Gauteng.
Current 4x4: Nissan Patrol 4.8grx
Suzuki Sidekick 1.6
Home Language: English
Location: Kempton park
Been thanked: 4 times

Re: Remote control programming

Post by pdasilva »

Didi wrote:Nissan Patrol Reference Document
Page 49 of 138
KEYLESS REMOTE - REPROGRAMMING
Heres how it’s done:
1. Get in your vehicle and close all the doors.
2. Using your drivers lock button, lock all doors.
3. After doors are locked take your ignition key and insert it and remove it from ignition
switch approximately 6 times within a 10 second period a reasonably quick way. Make
sure the key is all the way out before inserting again.
4. The hazard lights should flash and the doors will unlock.
5. Re-lock the doors using the drivers lock button.
6. Put the key in ignition switch and turn to the on position. Do not start the engine or
you will have to start again.
7. When in the on position hit the lock button on the remote, one time, the hazard
lights should flash.
8. Turn the ignition off and remove the key, open the drivers door and close, then test
the key.
Note: You will have to reprogram all your remotes at once, if you do not your old remotes
will not work. If you have other remotes press their buttons within 7 seconds of the
first one.

Hope this help.
Hi there.

I have tried this but with no success.I dont get past point 3 my hazards never get to flash.
pdasilva
Senior Member
Senior Member
Posts: 123
Joined: 03 Jun 2011 14:07
Full Name: Paulo
Nickname: da Silva
Home Town: Kempton Park , Gauteng.
Current 4x4: Nissan Patrol 4.8grx
Suzuki Sidekick 1.6
Home Language: English
Location: Kempton park
Been thanked: 4 times

Re: Remote control programming

Post by pdasilva »

The friendly guys at Mark white Nissan assisted me.

You need to turn the ignition switch ON and OFF six times before then hazards kick in. Then you can follow the procedure above.Also the door does not need to be closed when doing this.
User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5850
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 591 times
Been thanked: 468 times

Re: Remote control programming

Post by ricster »

:thumbup: :thumbup: :thumbup: Well done mate !!!!
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD
User avatar
Tony
Senior Member
Senior Member
Posts: 316
Joined: 06 Feb 2010 14:58
Full Name: Antonio Barone
Nickname: Tony
Home Town: Greyton - W/Cape
Current 4x4: Nissan Patrol 4.8 GRX
Home Language: English
Been thanked: 40 times

Re: Remote control programming

Post by Tony »

I had both my wife's Xtrail remotes replaced and reprogrammed as well as one of mine from Craighall Locksmiths - cost a lot less than Nissan - I just cannot remember the guy's name - Tel No. is 011 787-2199 or 083 602-6026.
User avatar
Jorrie
Patrolman 1000+
Patrolman 1000+
Posts: 2184
Joined: 21 Jun 2011 18:55
Full Name: Jacobus Jordaan
Nickname: Jorrie
Home Town: Pretoria
Current 4x4: 1998 Nissan Patrol 4500 GRX (now in Benji's hands), 2019 Zook Gen 4, 2011 4.8 GRX Patrol Adventure 60
Home Language: English/Afrikaans
Location: Pretoria
Has thanked: 184 times
Been thanked: 165 times

Re: Remote control programming

Post by Jorrie »

Tony wrote:I had both my wife's Xtrail remotes replaced and reprogrammed as well as one of mine from Craighall Locksmiths - cost a lot less than Nissan - I just cannot remember the guy's name - Tel No. is 011 787-2199 or 083 602-6026.
Thank you very much Tony. I will certainly follow it up.
Jorrie
1998 4500 GRX (Benji)
2011 4800 GRX Adventure 60 (Jorrie)
2011 Jimny Sold (Benji)
2 x 2019 Jimnies (1 x Lizzybean69, 1 x Jorrie)
User avatar
SJBS
Full Member
Full Member
Posts: 34
Joined: 10 Feb 2013 09:44
Full Name: Steve Barnard
Nickname: Steve
Home Town: Ellisras
Current 4x4: 99 Trol 4500 GRX
Range Rover
Terrano
Home Language: Afrikaans
Has thanked: 5 times
Been thanked: 2 times

Re: Remote control programming

Post by SJBS »

Jorrie wrote:
Tony wrote:I had both my wife's Xtrail remotes replaced and reprogrammed as well as one of mine from Craighall Locksmiths - cost a lot less than Nissan - I just cannot remember the guy's name - Tel No. is 011 787-2199 or 083 602-6026.
Thank you very much Tony. I will certainly follow it up.

Jorrie,

Let us know how it panned out - I also have a '98 GRX with the buttons pushed through... Thus will have to invest in some new remotes soon.
Post Reply

Return to “13. Electrical & Electronics”

Who is online

Users browsing this forum: No registered users and 10 guests