GOOD DAY LADYS AND GENTS ! (yes we do have a few ladys for those of you that have not rememberd ! ) Your panhard rod , if it is solid , then why not cut it , thread the outside of one end , then machiene up a thick walled sleeve with thread in one end . Then press and weld the sleeve onto the unthreaded section of panhard rod . Add a pinch bolt to the sleeve to stop the thread from rattling and twisting . To adjust , remove one bush pin bolt , and turn one end 180 degrees at a time to get the desired length . The only problem is finding a good turner to machiene up the parts and do the press work and welding . This is perhaps a simpler and cheaper idea than a left and right thread as left hand threads are very expensive to cut for "one off jobs" . (you can't get one , two , or five cents any more , so that will have to be my ten cents worth !) CHEERS FOR NOW .
Can we get rid of STUPID DRIVERS before they kill us ?