EGT TEMPS ON 4.8 PETROL PATROL

Engines and Engine Systems
Mystical_Beast
Senior Member
Senior Member
Posts: 141
Joined: 26 Sep 2015 23:03
Full Name: Julian Hilder
Nickname: none
Home Town: Edenvale
Current 4x4: 2018 Patrol 4.8 Vortex SuperCharged
2007 RRS 4.4 V8
2004 Colt Rodeo 3000
SIII Landy pick-up
Home Language: English
Has thanked: 15 times
Been thanked: 18 times

EGT TEMPS ON 4.8 PETROL PATROL

Post by Mystical_Beast »

Good morning all

I am looking for a couple of pointers here..

I installed a VDO Egt Gauge when I had my Patrol super-charged, but even though I thought I would pay proper money for a decent gauge, there was no indication as to where one should actually fit the probe.
We ended up fitting it at the accumulation point where the two downpipes come from the manifold.

Now its obvious that wherever you mount the probe will affect the reading.
It was determined by RGM that the accumulation point would be the hottest point.

In all reading on various forums, EGT probes are mostly fitted to diesels and it seems the bench mark safe temp is around 650 degrees.
Any Idea what it should be for the 4.8 Petrol motor.

In general driving, without really pushing at all I can easily see 750 degrees, if I push it I can go to 880 degrees. The gauge itself only reads to 900!!

So it seems to make the whole gauge installation superfluous. This on a petrol motor.

So lets say I push on and sit at a steady 150 km/hr, the EGT Gauge will sit at around 750 to 800 degrees.
I also have an oil temp gauge and that shows oil as being just on operating temp.
The third line after zero, so oil remains cool.

Is it possible the thermo-couple is faulty, or are the temps I am seeing pretty much what I should expect?

It may be worth mentioning that taking the foot off the pedal sees an immediate drop in EGT readings.

My issue is I have no bench-mark parameter to interpret what I am seeing on the gauge and naturally I want to make sure that I’m not running too hot etc.

The issue then is the temps are way up on the chart regardless, even a gentle cruise will see me at around 700 degrees.

Any advice, pointers or opinions would be appreciated.
IMG-20180716-WA0000.jpg
graham1
Patrolman
Patrolman
Posts: 577
Joined: 15 Jun 2015 17:46
Full Name: graham robertson
Nickname: graham1
Home Town: Harties
Current 4x4: 2004 Patrol 4.8; 1999 Patrol 4.2D
Home Language: English
Has thanked: 9 times
Been thanked: 100 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by graham1 »

A quick search on EGTs, I found a guy talking about them on his 4.0 l Prado. He says the max he got while towing was 690.

Dont even know what thats worth, but on first judgement it does seem yours run quite high. is that a bad thing for the 4,8 though? Who knows?
Mystical_Beast
Senior Member
Senior Member
Posts: 141
Joined: 26 Sep 2015 23:03
Full Name: Julian Hilder
Nickname: none
Home Town: Edenvale
Current 4x4: 2018 Patrol 4.8 Vortex SuperCharged
2007 RRS 4.4 V8
2004 Colt Rodeo 3000
SIII Landy pick-up
Home Language: English
Has thanked: 15 times
Been thanked: 18 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Mystical_Beast »

Thanks Graham..

I still have to wonder about the whole measurement of EGT in an aftermarket scenario.

I can move the probe 10 cm away and now say Temps are fine?

I have a heat gun, think I must test the probe..
User avatar
hugejp
Patrolman 1000+
Patrolman 1000+
Posts: 2052
Joined: 21 Oct 2014 21:01
Full Name: JP Viviers
Nickname: Oupoot
Home Town: JHB
Current 4x4: THE PATROL COLLECTION
2004 4.8 GRX TURBO "Tinkerbell"
2003 TD42T GRX "The Coal Roller"
Home Language: Half & Half
Has thanked: 211 times
Been thanked: 217 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by hugejp »

Petrol EGT figures will be higher than diesel, as petrol is less efficient & the unspent energy escapes as heat.
----------------------------------------------------------------------

You CAN with a NISSAN!

Jy KAN met 'n DATSUN!
Mystical_Beast
Senior Member
Senior Member
Posts: 141
Joined: 26 Sep 2015 23:03
Full Name: Julian Hilder
Nickname: none
Home Town: Edenvale
Current 4x4: 2018 Patrol 4.8 Vortex SuperCharged
2007 RRS 4.4 V8
2004 Colt Rodeo 3000
SIII Landy pick-up
Home Language: English
Has thanked: 15 times
Been thanked: 18 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Mystical_Beast »

Thanks JP

That's the kind of info I need to know.

Anyone know what normal operating EGT's on a large straight 6 would be?
I could test the thermocouple with a heat gun except that at prsent the distance between Heat Gun and Patrol is 300 km :biggrin:
User avatar
David M
Patrolman
Patrolman
Posts: 794
Joined: 12 Nov 2013 15:13
Full Name: David Marais
Nickname: David Marais
Home Town: Midrand
Current 4x4: 1998 4.5 GL Patrol
2006 4.2 Td Bakkie (SWAMBO's) - The "Firetruck"
Home Language: English
Location: Midrand
Has thanked: 20 times
Been thanked: 96 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by David M »

I am assuming that the 4.8 also has aluminium pistons which are the weakest part of the whole setup as aluminium is not keen on temps above (some sources say 660 and others 750).
If the purpose of your EGT gauge is to protect the pistons you want the probe as close to the pistons as possible.
If your exhaust manifold is the 6 into 2 setup I would put it as close to no 6 as possible as this is the cylinder that gets the most toasty on any straight 6.
:mytwocents:
There are still places out there!!!! - Daniel Goz - The "Tapam" movie
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Peter Connan »

Yeah this is a bit tricky.

As David points out, the whole point of the exercise is to protect the engine, and this is done by keeping the temperatures of the cylinder head and piston crown below the temperature where they go through a change in cristaline structure.

The materials in petrol and diesel engines are the same, thus around 750 is about the maximum safe limit.

But it could be that you are getting some combustion still happening after exhaust, and who knows where that goes. On F1 engines the exhausts glow white hot, probably in excess of 1200 degrees...

So I'm not really helping much here. Sorry.
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Peter Connan »

Some interesting reading matter, which indicates that the temperatures you are seeing may not be out of the ordinary:

The article also gives some interesting insights into turbocharger design and some of the pitfalls associated with smaller, more highly-stressed engines...

http://www.turbos.bwauto.com/tools/down ... =105&d=327
Mag ons ons kenniskry met lekkerkry aanhoukry.
User avatar
Michael
Moderator
Posts: 2479
Joined: 05 Mar 2014 14:39
Full Name: Michael
Nickname: Steyn
Home Town: Centurion
Current 4x4: Patrol GU 4.2 Turbo Diesel
Home Language: Afrikaans
Location: Centurion, PTA
Has thanked: 189 times
Been thanked: 336 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Michael »

EGT's on a petrol engine is not as usefull as on a diesel.

On a diesel the EGT's are probably the most important number you want to see where on a petrol I would say the AFR is what will be the killer if it runs too lean........ soecially on forced induction.

Julian, I dont think your readings are out of the ordinary. From what I have read on the net the petrols read higher EGT's than diesels.
"The Just shall live by Faith" Rom1:17

Check out my build here My Patrol
And my engine rebuild here mostly engine related stuff
User avatar
Peter Connan
Moderator
Posts: 6005
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 1065 times
Been thanked: 983 times

Re: EGT TEMPS ON 4.8 PETROL PATROL

Post by Peter Connan »

And here is a slightly conflicting viewpoint:

https://www.team-bhp.com/forum/technica ... t-gas.html

According to that, 900 should probably be considered as a maximum. More importantly, high EGT's may point to a lean-running engine. If you are not already measuring AFR, then you probably should. At the very least, get it back on the dyno with exhaust gas anyliser attached, as running lean will kill your engine.
Mag ons ons kenniskry met lekkerkry aanhoukry.
Post Reply

Return to “09. Engines”

Who is online

Users browsing this forum: No registered users and 8 guests