Over heating problems

Engines and Engine Systems
DanieG
Full Member
Full Member
Posts: 29
Joined: 30 Oct 2016 21:17
Full Name: Danie Gerryts
Nickname: Danie
Home Town: Stilbaai
Current 4x4: 2013 Nissan Patrol 4.8 GRX A/T
1995 Isuzu 2.5 4X4
Home Language: Afrikaans
Has thanked: 13 times
Been thanked: 3 times

Re: Over heating problems

Post by DanieG » 11 Jan 2018 08:11

Hi Josh
Mine did not overheat either, I had to fix a pipe and refill (partially). Do you run the engine while bleeding or how do you go about it?
Danie Gerryts
NSRI Station 31

User avatar
JoshJ
Patrolman 1000+
Patrolman 1000+
Posts: 1076
Joined: 30 Nov 2013 16:16
Full Name: Joshua Joubert
Nickname: Joshua
Home Town: Swakopmund Namibia
Current 4x4: 2003 Patrol 4.8 GRX
Home Language: Afrikaans
Has thanked: 80 times
Been thanked: 92 times

Re: Over heating problems

Post by JoshJ » 11 Jan 2018 08:15

Yes, get the car up to normal temps. Put heater on full warm. The while idling you remove the cap. You will see the bubbles and a poor stream of water come out. Continue until you see a solid strong stream of water comming out. Put the cap back. Wait a bit and do it again until their is no more air comming out. Top up coolent in the plastic overflow bottle.
Being alive is a Blessing!!

Regards,
Joshua

Clem
Patrolman
Patrolman
Posts: 845
Joined: 19 Jun 2013 15:16
Full Name: Clem Daniel
Nickname: Clem
Home Town: Johannesburg
Current 4x4: Patrol 4.8
Home Language: English
Has thanked: 30 times
Been thanked: 22 times

Re: Over heating problems

Post by Clem » 11 Jan 2018 13:37

DanieG wrote:
10 Jan 2018 11:20
Louis Nel wrote:
02 Jan 2018 15:11
DanieG wrote:
07 Oct 2017 13:01
I have a strange problem, the metal pipe to the front of the starter motor leading to the heater (I presume), picked up a small crack on the way to the Namib, which they welded in Keetmanshoop. (Fortunately I picked it up before the car lost too much coolant and the engine temperature never climbed above normal.) They had to partially drain the coolant and I am not sure if the system was properly bled. The car runs at a very stable temperature, a little below normal and the coolant stays full. However, when towing or driving a long distance, I hear a boiling sound for a short while after stopping and swiching off, while the guage remains at normal. There is also no sign of water leaking or boiling. When I start again, it feels as if the heater comes on for a while. We, unfortunately, do not have any Patrol specialists nearby so I hope one of the specialists on the Forum has advice.
Normally if the cooling system makes a boiling sound but your Temp Gauge is normal, then its a coolant flow problem.
I had It on a Golf 1. I took the small pipe that's on the top of the Rad that leads to the bottle off, and it was blocked.
The min I cleared it out then the trouble was over. So that Patrols cooling system sounds as if the flow is a bit restricted and because of that its not cooling down fast enough.
The heater comes on and off at random while travelling, which is highly annoying. I read on an Aussie website recently of a 4.8 having exactly the same problem after flushing the cooling system. Apparantly the system has to be bled at a screw in front of the cylinder head to release all air. Does anybody have more info on that, I do not want to start unscrewing the wrong bolts.
See here: http://patrol4x4.co.za/viewtopic.php?f=44&t=4587

User avatar
Jules
Patrolman 1000+
Patrolman 1000+
Posts: 1768
Joined: 08 Apr 2009 09:13
Full Name: Julius
Nickname: Jules
Home Town: Rietjiesvlei, Zoeloeland
Current 4x4: GQ Patrol
Home Language: AFR
Has thanked: 62 times
Been thanked: 28 times

Re: Over heating problems

Post by Jules » 14 Jan 2018 07:52

More, wil graag sekerheid kry moet my lorrie se neus afwaarts wys of moet hy opwaarts wys wanneer mens hierdie borrel gorrel oefening doen

Shalom
Walk by FAITH not by sight
Patrol 1995 SGL
aka "Nomakanjani"
ProComp Extreme A/T 31x10.5R15
ARB Bullbar
OME, Frontrunner Roofrack
60L Snomaster Freezer/Fridge

User avatar
ricster
Patrolman 1000+
Patrolman 1000+
Posts: 5531
Joined: 13 Jan 2010 11:16
Full Name: Cedric Warner
Nickname: Cedric
Home Town: Alberton Gauteng
Current 4x4: '99 Nissan Patrol 4.2 Turbo Diesel
Home Language: English
Location: LA..... No not Los Angles ..... Lower Alberton, Gauteng
Has thanked: 180 times
Been thanked: 209 times

Re: Over heating problems

Post by ricster » 14 Jan 2018 09:32

Nose up, in my opinion Jules. The motor already sits at a slight angle ( front up ). This way air will move towards the thermostat housing, and can be bled off from there. Alternatively the air bubble will move into the radiator, and then one can either top it up or let the radiator cap do its thing as long as the motor gets up to temp and pushes the air bubble out to the water reservoir tank, and then when it cools it will suck the the coolant back into the radiator.
Regards
Cedric
Nissan Patrol GL 4.2 Diesel Turbo (Iron Maiden)
Nissan SANI 3.0 V6 4x4 (SOLD)
Isuzu KB 280 DT 2x4 ('ol Smokey) - SOLD
Suzuki TL 1000R "V twin" (Growler) - SOLD

mvcoller
Senior Member
Senior Member
Posts: 92
Joined: 07 Apr 2009 07:13
Full Name: Malcolm van Coller
Nickname: mvcoller
Home Town: Kensington, Jhb
Current 4x4: 2008 3.0 Di Patrol GL
and
2011 2.5 Di Pathfinder LE
Home Language: Afr & Eng
Location: Kensington, Jhb
Has thanked: 1 time
Been thanked: 17 times
Contact:

Re: Over heating problems

Post by mvcoller » 14 Jan 2018 12:14

When you bleed any cooling system, you must always open the highest point of the system as the air needs to go to the highest point to escape. Therefore, as as Cedric says, park the vehicle nose up, so that the radiator cap is the highest point in the system

For that same reason, that "cap" in the 4.8 engine bay that JoshJ mentions, is obviously the highest point in the system. In this case successful bleeding is achieved even when the vehicle is parked to stand level.

User avatar
Jules
Patrolman 1000+
Patrolman 1000+
Posts: 1768
Joined: 08 Apr 2009 09:13
Full Name: Julius
Nickname: Jules
Home Town: Rietjiesvlei, Zoeloeland
Current 4x4: GQ Patrol
Home Language: AFR
Has thanked: 62 times
Been thanked: 28 times

Re: Over heating problems

Post by Jules » 14 Jan 2018 13:19

ek het 2 radiator caps , 1.1b op radiator en 0.9b op overflow radiator cap , moes n modification doen toe overflow se pyp connection op oorspronklike radiator afgebreek het , die overflow is op hoogste punt

shalom
Walk by FAITH not by sight
Patrol 1995 SGL
aka "Nomakanjani"
ProComp Extreme A/T 31x10.5R15
ARB Bullbar
OME, Frontrunner Roofrack
60L Snomaster Freezer/Fridge

User avatar
Jules
Patrolman 1000+
Patrolman 1000+
Posts: 1768
Joined: 08 Apr 2009 09:13
Full Name: Julius
Nickname: Jules
Home Town: Rietjiesvlei, Zoeloeland
Current 4x4: GQ Patrol
Home Language: AFR
Has thanked: 62 times
Been thanked: 28 times

Re: Over heating problems

Post by Jules » 14 Jan 2018 18:44

my return watertank do not send any water back into the system?? I had to pour some back into system to get the level to max again . did the heater on and stopped on incline and let it run topped up until no borrels

shalom
Walk by FAITH not by sight
Patrol 1995 SGL
aka "Nomakanjani"
ProComp Extreme A/T 31x10.5R15
ARB Bullbar
OME, Frontrunner Roofrack
60L Snomaster Freezer/Fridge

User avatar
Peter Connan
Moderator
Posts: 5026
Joined: 10 Sep 2010 07:21
Full Name: Peter Connan
Nickname: Piet
Home Town: Kempton Park
Current 4x4: 1996 Patrol 4.5SGL
Home Language: Afrikaans
Location: Kempton Park
Has thanked: 204 times
Been thanked: 282 times

Re: Over heating problems

Post by Peter Connan » 15 Jan 2018 05:15

It must be able to draw water from the overflow tank, but this will only happen once the car has cooled right down.

Jules, if this is not happening, there may be an issue with your modification.
Mag ons ons kenniskry met lekkerkry aanhoukry.

Post Reply

Return to “09. Engines”

Who is online

Users browsing this forum: No registered users and 1 guest